Specification

304 SS
Corner Shelf
DO NOT SCALE DRAWING
700-7006
SHEET 1 OF 2SCALE: 1:4
ADWG. NO.
A
SIZE
TITLE:
APLICATION
Q.A.
MFG APPR.
ENG APPR.
CHECKED
J. AMOZOC
FINISH
MATERIAL
0.1
TOLERANCING PER: ASME Y14.5-2009
INTERPRET GEOMETRIC
.XX
5/14/21
0.01
.XXX
5/14/21
1906 EAST DOMINGUEZ
REV
LONG BEACH, CA 90810
-
5/14/21
-
5/14/21
RELEASED
REMOVE ALL BURRS & SHARP EDGES
USED ON
NEXT ASSY
TOOLING FIXTURE #
MACHINING
TESTING
POLISHING
ASSEMBLY
DRAWN
5/14/21
J. AMOZOC
J. AMOZOC
R. CANO
XX/XX/XX
-------------
-------------
-------------
-------------
-------------
ZONE
-
REV
-
ECN NO./DESCRIPTION
DATE
APPROVED
J.A.
1BEND
1ANGLES
1/64
8. MASK THIS SURFACE PRIOR TO POWDER COAT.
2. PART GEOMETRY IS DEFINED BY CAD MODEL PROVIDED BY ENGINEERING.
7. DO NOT POLISH THIS SURFACE.
6. MIRROR POLISH 600 GRIT FOR SS POLISH FINISHES ONLY.
18-20 Cr, 8-10.5 Ni, 0.08 C, 2.0 Mn, 0.75 Si, 0.045 P, 0.030 S, 0.10 N
ONLY.
5. GRAIN DIRECTION PER ASME Y14.36M-1996 FOR METAL SATIN FINISHES (180 GRIT)
S304000( UNS), SHOULD BE AS FOLLOW:
4. DIMENSIONS IN BRACKETS [] ARE MILLIMETERS AND FOR REFERENCE ONLY.
3. AESTHETIC DIMENSIONS SHALL NOT AFFECT FIT AND FUNCTION OF PART.
0.005
ALL THREADS ARE CRITICAL
C O R P O R A T I O N
DENOTES CRITICAL DIMENSION
X.X
[phone]
-------------
-------------
-------------
-------------
SEE NOTE
A A
B B
C C
D D
4
4
3
3
2
2
1
1
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES: DECIMALS
FRACTIONAL
NOTES:
1. TYPICAL COMPOSITION (%) OF STANDARD STAINLESS STEEL 304 (AISI TYPE),
.X
Proprietary & Confidential
This drawing and the information
contained herein is the property of
Seachrome Corporation and shall not be
reproduced, copied, or disclosed in whole
or in part, or used in manufacturing,
or for any other purpose without the
written permission of Seachrome
Corporation.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 300230 Corner Shelf 1
2 S-4500-110050 #10 x 1” Phillips Pan Head 410 SS Self-tapping 4
1
2
=
23.42
.9
359.96
14.2
1.9
48.82
8.0
203.20
6.0
152.40
200.41
2.38
7.9
R.1
8.0
203.20