Installation Instructions

MANUFACTURED BY FOR
INSTALLATION INSTRUCTIONS
BRACKET INSTALL:
MARK SHELF HEIGHT:
Using a laser level or level
measuring points within
your structure.
SECURE BRACKET:
Finger tighten clamp bolts,
then secure with screws at
front top, then front bottom.
Then tighten clamp bolts.
H 5/16” x 2-1/2” LAG
SCREWS/WASHERS PROVIDED
PRE-DRILL SIDES:
Pre-drill through screw
holes on sides.
SECURE SIDES:
Right side first — Fasten
sides with screws though
pre-drilled holes.
H 5/16” x 2-1/2” LAG
SCREWS/WASHERS PROVIDED
WARNING!
!
CONTENTS OF THIS KIT:
(1) POST-RACK BRACKET
(6) 5/16”X 2-1/2” HOT-DIPPED LAG SCREWS
(6) 5/16” WASHERS
LUMBER AND DECK/FLAT-HEAD WOOD SCREWS FOR
SHELVING NOT INCLUDED
SAFETY INSTRUCTIONS:
[phone] Post-Rack.com
Attach Post-Rack™ Bracket to structure per manufacturers specifications
and with hardware provided.
Make certain brackets are level.
Brackets should be mounted at or below the midpoint of all uprights -
limited to two levels of shelving load.
Do not exceed 1000 lbs. total weight (evenly distributed load) per shelf
(12’ span max).
Load (materials) on shelf shall not overhang depth of shelf.
Do Not Climb on shelves and/or brackets.
Not responsible due to misuse, improper fastening or splitting wood.
Wear and utilize Personal Protection Equipment (PPE) when installing
brackets and shelves.
Do not utilize # of shelves and position of shelves that will exceed
loading on post-frame structure.