Installation Guide

8
ASSEMBLY INSTRUCTIONS
DD
DD
6
A
Canopy
Coupling
5.
Hardware Used
Machine Screw
x 2
BB
Attach mounting strap (CC) to outlet box (not
included) using existing washers and outlet box
screws or the machine screws (BB). NOTE: If the
outlet box screws required for your outlet box are of
a different size than the machine screws (BB),
consult a licensed electrician before proceeding.
Tighten machine screws (BB) to secure mounting
strap (CC) to outlet box.
CAUTION: Make sure the outlet box can
support 35 lbs. hanging weight. Use metal outlet
box; plastic outlet boxes are not recommended.
5
Outlet Box
CC
BB
BB
6.
Locate cord that comes through hollow coupling and
is attached to yellow and red wires on the inside of
the canopy of the fixture (A). Using the clip at one
end of the safety cable (DD), attach safety cable
(DD) to the coupling referenced above. [See
drawing at right.]
Washer
Mounting Strap*
(*not to scale)
x 1
CC
Hardware Used
DD
Safety Cable*
(*not to scale)
x 1
Coupling