User's Manual

MECHANICAL INSTALLATION

Placement of the Base Unit

It is important for the Base Unit to have a good reception quality for the RF signals transmitted from all

the sensors and controllers.

 Place the Base Unit in the central area at your home or business.

 Keep the Base Unit away from large appliances and other metal objects.

 Locate the Base Unit near a power outlet and a telephone socket (if telephone line is needed.).

Install the Door Sensors, PIR and all the other sensors according to your site planning.

Check the radio signal quality from the RSSI (Receiving Signal Strength Indication) reading on the LCD

by pressing the test button on the sensors. Relocate the sensors/Base Unit to get the best reading (dB

number) if necessary.

Do not attach the transmitter on a metal surface; this will shrink the RF signal transmission range.

Plug in the AC adaptor and telephone line.

Attach the Base Unit to the wall using the Mounting Bracket

1. Attach the

Mounting Bracket

on the wall.

3. Attach the Base

Unit to the Mounting

Bracket and push up.

4.Tighten the screws

Mounting Bracket Tamper Switch Cam

2. Insert the screw

for the keyhole