Rangehood & installation guide DS3326-9S Revision V1 HOME APPLIANCES www.schweigen.com.
Index 1. Welcome ____________________________________________________________________________________________________ 3 2.
1. Welcome Thank you for purchasing your new Schweigen rangehood. To get the maximum output from this unit, please read through this guide before use. The guide contains important information on the use and maintenance of the unit, as well as important safety notes. This will ensure your personal safety and the lasting value of your rangehood. We trust that you will enjoy your new Schweigen rangehood. Please always retain your proof of purchase to aid in any warranty queries.
2. Your Safety WARNING Please read this section thoroughly before attempting to operate the appliance. Inspect your product upon receipt. Any damage or defects MUST be reported within 48 hours, or no claim will be recognised. DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAGED. If this product is installed damaged, neither the supplier, nor the retailer, will be responsible for the costs associated with the repair, replacement, removal or re-installation of the appliances. 1.
2. Your Safety Before Installation 1. We recommend this appliance be installed or repaired by a qualified Schweigen Home Appliances technician. 2. Please see our website www.schweigen.com.au for recommended installers. 3. It is dangerous to modify any part of this appliance. Modification of any kind, will immediately void the warranty. 4. The manufacturer declines all responsibility in case of failure to adopt proper safety measures. 5.
2. Your Safety Product Use This product is designed for household use and should not be used for commercial applications. After use, always ensure that all controls are in the “OFF” position. When frying with a gas flame, take particular care not to allow the oil or grease in the pan to catch fire. (Flambé) Maintenance and Service The rangehood surface should be cleaned with soft cloth and non-corrosive detergent. Do not leave the rangehood wet after cleaning or use, please keep rangehood dry.
3. Tips & Suggestions The Rangehood has one mode of operation: Air extraction: The air is drawn in and cleaned by the grease filters and directed outside. Please check the cleaning and maintenance section for the filters’ cleaning periods. For Users 1. Do not leave the frying pan or fryer unattended, as the oil could overheat and catch fire. 2. Never flambé any foods beneath the rangehood. The flames could cause a fire. 3.
4. Description Main Rangehood 1 Mounting Bracket 2 Extension Flue Piece 3 Main Flue 4 For use with Isodrive motor system 5 Male Plug (Main Power 240V) Used for silent and non silent models 6 Single Outlet 200mm 7 Reducer (For Isodrive 650 only) 8 Filter 9 Lamp (For GU10 fittings, please twist to remove) 1 2 3 4 5 6 7 8 NOTE: Filter and light quantity may vary from model to model. 9 Speed Control This rangehood is equipped with a 5 speed electronic control.
5. Operation Schweigen silent rangehoods are recognised for their silent operation. Although this holds true for all of our rangehoods with external motors, one must note that the rangehoods are silent when they are used for regular cooking on the lower fan setting. Therefore, you will only hear the movement of air. Control Panel Fan level indicator Fan On/Off Fan Level Reduction Fan Level Increase Timer Lamp On/Off Turning on the rangehood. Press the On/Off button.
6. Cleaning & Maintenance WARNING Always switch off and disconnect power before cleaning. Surfaces Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or solvents on any part of this appliance, Always make sure to dry the appliance after cleaning and never leave wet, as this will cause irreparable damage. Filters • For this appliance to function effectively, regular maintenance is a must.
6. Cleaning & Maintenance WARNING • If the grease filters are very dirty, the motor will extract only a small quantity of air, which reduces its efficiency; • The grease deposits that build up on the filter are highly flammable and COULD EASILY CATCH FIRE. • The manufacturer is exonerated from all responsibility in the event of fire due to poor maintenance of the grease filters. Cleaning the Interior Clean the interior of the rangehood with a damp cloth and a neutral detergent or denatured alcohol.
6. Cleaning & Maintenance Cleaning the Exterior We recommended using a soft cloth, water and a liquid soap, rinsing it well and then drying it thoroughly. For better results, you can use high quality cleaning and protection products (eg. Steel Kleen) to clean your rangehood. WARNING • Make sure that the electrical power is off. • The recommended detergent is a solution of water and a neutral liquid soap. • It is very important for the liquid soap to not contain granules that could scratch the surface.
6. Cleaning & Maintenance Replacing the LED Lamps Fan level indicator DANGER Fan On/Off Fan On/Off Always switch off and disconnect power before replacing the lights. Failure to do so may cause serious Please that the light bulb will retain heat for a Fan Level Fan injury. Level Timer be aware Lamp On/Off Reduction Increase short period of time after being switched off. Fan level indicator Fan Level Reduction Fan Level Increase Timer • Lamp On/Off Disconnect the hood from mains.
7. Installation DANGER Always switch off and disconnect power before installing the rangehood. Failure to do so may cause serious injury. Wall Mount Installation Every wall mounted rangehood has two primary mounting points and several secondary mounting points to firmly fix the rangehood in its place. Primary mounting points Use suitable bolts to mount the appliance on a secure surface. Please ensure that the holes for the two primary mounting points are level before installation.
7. Installation Fan level indicator Fan On/Off Fan Level Reduction Fan Level Increase Timer WARNING Lamp On/Off See Mounting Laws and Regulations If the user decides to install the rangehood at a distance of less than minimum height above the cooking surface, the company declines responsibility for damages suffered by the Gas or damage to rangehood due to excess Electric heat objects, people and others caused directly or indirectly by a malfunction, breakage or fire.
7. Installation D E D E Drill the D, E points with a Ø 6mm drill bit to screw the flue installation plate referring to the min. and max. heights of the appliance. Install 6 mm dowels to the holes you have drilled. D D D D E Tightening the suspension screws E Tighten 5.5x60 suspension screws to Ø10 mm dowels (A, B) you have tapped on the wall. The distance between screw head and the wall will be 5 mm.
7. Installation After you have fixed your hood completely, secure the body with a screw from the hole (C) inside the body to prevent it from moving. NOTE: If the hood seems skewed, adjust the alignment of the hood by loosening the M5 screws that the suspension plates on the top are installed to. Installation of aluminum pipe: Install the flexible aluminum pipe to the plastic 200mm outlet. Tighten the inner flue to the flue installation plate secured on the wall from its upper external sides.
7. Installation Flexible Ducting For the Isodrive motor, please do not crush or kink flexi ducting, as it will reduce air flow and may cause noise to occur through the system. Ducting needs to be kept taut at all times. PLEASE REFER TO THE ISODRIVE MOTOR INSTALLATION GUIDE FOR MORE DETAILS ON FLEXI DUCTING WITH THE SILENT MOTOR SYSTEM. Overview 1 2 1 Isodrive Motor 2 Roof Seal Kit (Dektite)* 3 Support Straps* 4 Attach Flexi Duct to Bell-Mouth Adaptor using duct tape and cable tie.
8. Maintenance Condensation Information The induction cooktop is designed to provide rapid heating, improved thermal efficiency and greater heat consistency. For some customers with an induction cooktop, condensation can form on their rangehood filters while using their cooktop. The induction cooktops’ heat source is contained in the conductive base of the pot.
Check motor switch. Please ensure that there is power to the rangehood and the rangehood is switched on. Rangehood does not work X X Light does not work X Loud noise from the rangehood Technical Specifications Model Feeding Voltage Page 20 DS3326-9S 220-240V 50Hz X Rangehood air suction is weak X Rangehood does not direct air out (through chimney) X X X X X Check Isodrive installation manual, make sure the flexi ducting is installed correctly, eg. Length of ducting used, keep the ducting taut.
8. Maintenance Calling the Technical Assistance Service Hotline In the event that the failure is not due to the faults mentioned in Troubleshooting, contact Technical Service on 1300 829 066. A service request will require the following information: • The purchase date • The rangehood model and motor type (eg.
9.
10. Disclaimer Under our policy of continuous product development, product specifications may change without notice. Prospective purchasers should therefore check with the retailer to ensure this publication correctly describes the products being offered for sale.
HOME APPLIANCES Distributed by: Unit 102/45 Gilby Road, Mt Waverley 3149 Victoria. 1300 881 693 (EST) www.schweigen.com.
