RANGEHOOD & INSTALLATION GUIDE NAUM-6 Revision V1.2 www.schweigen.com.
Index 1. Welcome ______________________________________________________________________________________ 3 2. Your Safety Warning ________________________________________________________________________________________ 4 Before Installation ______________________________________________________________________________ 5 Product Use ______________________________________________________________________ 6 3.
1. Welcome Thank you for purchasing your new Schweigen rangehood. To get the maximum output from this unit, please read through this guide before use. The guide contains important information on the use and maintenance of the unit, as well as important safety notes. This will ensure your personal safety and the lasting value of your professional rangehood. We trust that you will enjoy your new Schweigen rangehood. Please always retain your proof of purchase to aid in any warranty queries.
2. Your Safety WARNING Please read this section thoroughly before attempting to operate the appliance. Inspect your product upon receipt. Any damage or defects MUST be reported within 48 hours, or no claim will be recognised. DO NOT INSTALL THIS APPLIANCE IF YOU FIND IT DAMAGED. If this product is installed damaged, neither the supplier, nor the retailer, will be responsible for the costs associated with the repair, replacement, removal or re-installation of the appliances. 1.
2. Your Safety Before Installation 1. We recommend this appliance be installed or repaired by a qualified Schweigen Home Appliances technician. 2. Please see our website www.schweigen.com.au for recommended installers. 3. It is dangerous to modify any part of this appliance. Modification of any kind, will immediately void the warranty. 4. The manufacturer declines all responsibility in case of failure to adopt proper safety measures. 5.
2. Your Safety Product Use This product is designed for household use and should not be used for commercial applications. After use, always ensure that all controls are in the “OFF” position. When frying with a gas flame, take particular care not to allow the oil or grease in the pan to catch fire. (Flambé) Maintenance and Service The rangehood surface should be cleaned with soft cloth and non-corrosive detergent. Do not leave the rangehood wet after cleaning or use, please keep rangehood dry.
3. Tips & Suggestions The rangehood has one mode of operation: Air extraction: The air is drawn in and cleaned by the grease filters and directed outside. Please check the cleaning and maintenance section for the filters’ cleaning periods. For Users 1. Do not leave the frying pan or fryer unattended, as the oil could overheat and catch fire. 2. Never flambé any foods beneath the rangehood. The flames could cause a fire. 3.
4. Description Main Rangehood 1 Male Plug (Main Power 240V) 2 Single Outlet 150mm 3 Filter 4 Lamp (LED Strip) 1 2 NOTE: Filter and light quantity may vary from model to model. 4 3 Speed Control This undermount is equipped with a 3 speed mechanical control. Speed control usage suggestions: • Low speed for simmering. • Medium speed for light cooking. • High speed for heavy frying or heavy cooking.
5.
6. Cleaning & Maintenance Warning Always switch off and disconnect power before cleaning. Surfaces Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or solvents on any part of this appliance, Always make sure to dry the appliance after cleaning and never leave wet, as this will cause irreparable damage. Filters • For this appliance to function effectively, regular maintenance is a must.
6. Cleaning & Maintenance WARNING • If the grease filters are very dirty, the motor will extract only a small quantity of air, which reduces its efficiency; • The grease deposits that build up on the filter are highly flammable and COULD EASILY CATCH FIRE. • The manufacturer is exonerated from all responsibility in the event of fire due to poor maintenance of the grease filters. Cleaning the Interior Clean the interior of the rangehood with a damp cloth and a neutral detergent or denatured alcohol.
7. Installation DANGER Always switch off and disconnect power before installing the rangehood. Failure to do so may cause serious injury. Cabinet Cutout Size Present the rangehood to your cabinet maker so that they may take their own measurements and check that the rangehood fits in the cabinet correctly. NOTE: Please make sure that all plastic protection on the rangehood and filters are removed before use.
7. Installation WARNING Measurements are from the top of the trivets to the lowest part of the rangehood, including the FRONT button VIEW section. SIDE VIEW If the user decides to install the rangehood at a distance of less than minimum height above the cooking surface, the company declines responsibility for damages suffered by the rangehood due to excess heat or damage to objects, people and others caused directly or indirectly by a malfunction, breakage or fire. See Mounting Laws and Regulations.
7. Installation Installation Example WARNING FRONT VIEW Please remove filters before installations. Failure to do so may damage the clips. SIDE VIE W Back Draft Base SIDE VIE Step 1 W Please make sure the cut out size is correct before installing the rangehood. Install the back draft base to the rangehood. TOP VIE W Cabinet BOT TO Step 2 M VIEW Secure the undermount into cavity using screws. All screws are installed from the bottom of the rangehood into the cabinet.
7. Installation Ducting Please do not crush or kink ducting, as it will reduce air flow and may cause noise to occur through the system. Ducting needs to be kept taut at all times. Back Draft Fins Should your Back Draft Fins get stuck, this is not a warranty issue. When installing Back Draft Fins, please ensure that you insert the Back Draft Fins onto the back draft base, which are attached to the top of the motor outlet before installation.
7. Installation Installation Advice • Never reduce flue diameter right next to the rangehood outlet fitting, refer to figure 1. • Never fit reductions next to curves or bends in the installations. They must always be in straight sections and as far as possible from the rangehood, refer to figure 2. • Avoid exccessive reduction of the flue size, as this drastically reduces extraction capacity, refer to figure 3. • Use an air extraction flue which is as short as possible.
7.
7. Installation Roof Cowls / Roof Seal Kit WARNING All electrical wiring should be kept inside the roof space. 1 Maximum of 4 metres of ducting for best result 2 4 1 Roof Cowls* 2 Flexi Ducting must be pulled taut. DO NOT crush or kink the ducting. 3 Connect flexi ducting to the outlet on rangehood using duct tape or cable tie. Please DO NOT rip the ducting.
8. Maintenance Cooking with Induction Cooktops Cooking with an induction or similar cooktop may produce condensation on the rangehood. Unlike basic electric or gas cooking, induction cooktops heat food and liquid instantly, which in turn, produces vapours rapidly. Because of this faster process, the rangehood filters do not have enough time to warm, which increases the chance of condensation forming.
Check motor switch. Please ensure that there is power to the rangehood and the rangehood is switched on. Rangehood does not work X X Light does not work X Loud noise from the rangehood Page 20 X Rangehood air suction is weak X Rangehood does not direct air out (through chimney) X X Check the outlet, make sure it is not blocked and you have the correct diameter ducting installed. X Please make sure there is no obstruction in ducting or back draft fins. X Check lamps and fuse.
8. Specifications Technical Specifications Model NAUM-6 Feeding Voltage 240V 50Hz Lamp Power — LED Strip (W) 2 x 2.5W (supplied) Front 150mm 26 5m 71mm m 29 5m m 269.5 mm m 490m m 523m 9.
10. Technical Support Technical Support It is not the responsibility of Schweigen Home Appliances to rectify any incorrect installations. A service call out fee will be charged for any Schweigen technician that attends a call, whereby it’s established that the fault is due to an incorrect installation or non-manufacturing fault.
Notes Page 23
Distributed by: 8/3-4 Anzed Court, Mulgrave 3170 Victoria. 1300 881 693 (EST) www.schweigen.com.
