Datasheet

ManualsBrandsSchurter ManualsFiltersPower Inlet with Filter 6 A 250 VAC

Power Entry Modules with Line Filter

KMF

https://www.schurter.com /PG06

EMC Products

IEC Appliance Inlet with Filter, Fuseholder 1- or 2-pole, Line Switch 2-pole

Order required accessories separately

Protection class I with shield

Protection class II without shield

See below:

Approvals and Compliances

C14

70° C

C18

70° C

Description

- Panel mount :

Snap-in version from front side

- 4 Functions :

Appliance Inlet protection class I or II , Line Switch 2-pole , Fuseholder

for fuse-links 5 x 20 mm 1- or 2-pole , Line filter in standard and medi-

cal version

- Quick connect terminals 4.8 x 0.8 mm

Unique Selling Proposition

- Most compact solution on the market

- Innovative EMC-shielding

- Easy and flexible snap-in mounting

- Protection class I or II versions

Characteristics

- Ultra-compact design. Small dimensions in front of and behind the pa-

nel

- All single elements are already wired

- For added safety "Extra-Safe" fuse drawers are available

- Innovative EMC-shielding with flexible steel segments for an excellent

contact

- Suitable for use in equipment according to IEC/UL 60950

Suitable for use in medical equipment according to IEC/UL 60601-1

Other versions on request

- Fuse drawer 1-pole, plus spare fuse case

- Fuse drawer 2-pole, with shorting bar

- Other rocker marking

References

Alternative: version without line filter KM

Alternative: version for screw mounting DD12

Weblinks

pdf datasheet, html-datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product

Technical Data

Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125/250 VAC;

60 Hz

Leakage Current standard < 0.5 mA (250 V / 60 Hz)

medical < 5 µA (250 V / 60 Hz)

Dielectric Strength > 1.7 kVDC between L-N

> 2.7 kVDC between L/N-PE

Test voltage (2 sec)

Allowable Operation Tempe-

rature

-25 °C to 85 °C

Climatic Category 25/085/21 acc. to IEC 60068-1

IP-Protection from front side IP 40 acc. to IEC 60529

Protection Class Suitable for appliances with protection

class I or II acc. to IEC 61140

Terminal Quick connect terminals 4.8 x 0.8 mm

Panel Thickness S Snap-in: 1/1.5/2/2.5 mm

(all steps with one variant)

Material: Housing Thermoplastic, black, UL 94V-0

appliance inlet/-outlet C14 C18 acc. to IEC 60320-1,

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I or II

Fuseholder 1 or 2 pole, Shocksafe category PC2

acc. to IEC 60127-6,

for fuse-links 5 x 20 mm

Rated Power Acceptance @

Ta 23 °C

5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per

pole

Power Acceptance @ Ta >

23°C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Line Switch 2-pole, non-illuminated, acc. to IEC

61058-1

Technical Details

Line Filter Standard and Medical Version, IEC

60939, UL 1283, CSA C22.2 no. 8

Technical Details

MTBF > 1'800'000 h acc. to MIL-HB-217 F

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

Summary of content (6 pages)

PAGE 1
KMF Power Entry Modules with Line Filter https://www.schurter.
PAGE 2
KMF Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
PAGE 3
KMF Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimensions [mm] 30.4 .5 R1 25.7 0. 3 +0.10 30.5 m 10.7 ax .R 32 50 47.5 N 47.8 -0.05 L 0 S ± 0.05 40.4 28.5 2.5 +0.10 28.8 -0.05 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard Version 2 x 11 47 2.2 - 2 Standard Version 2x4 47 2.2 - 4 Standard Version 2 x 1.6 47 2.2 - 6 Standard Version 2 x 0.
PAGE 4
KMF Power Entry Modules with Line Filter https://www.schurter.com /PG06 Diagrams Standard version Medical version (M5) L L L’ F1 L1 1) 2) Cy PE Cx L2 F2 Cy N PE PE’ L’ L1 1) N’ F1 Cx L2 PE’ F2 N’ N 1) Line 2) Load 2) R 1) Line 2) Load Medical version (M5) protection class II L L’ L1 1) F1 2) R Cx L2 F2 N’ N 1) Line 2) Load Derating Curves 2-pole Admissible power acceptance in Watt 2.0 1.5 I = 1.0 In I = 0.7 In 1.0 I = << In 0.5 0.
PAGE 5
KMF Power Entry Modules with Line Filter https://www.schurter.com /PG06 Medical version (M5) 1A 2A 4A 6A 10 A All Variants Rated Current [A] Filter-Type Fuseholder Line Switch Protection Class Order Number 1 Standard Version 1-pole 2-pole I KMF1.1211.11 █ 2 Standard Version 1-pole 2-pole I KMF1.1221.11 █ 4 Standard Version 1-pole 2-pole I KMF1.1241.11 █ 6 Standard Version 1-pole 2-pole I KMF1.1261.11 █ 10 Standard Version 1-pole 2-pole I KMF1.1291.
PAGE 6
KMF Power Entry Modules with Line Filter https://www.schurter.com /PG06 Required Accessory Description Fusedrawer 2 Fusedrawer für Fuse Links 5x20 mm, with or without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... Accessories Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0076 Cord retaining kits Cord retaining strain relief Flat head, A 4700.