Datasheet

SCHURTER GmbH
D – 79346 Endingen
www.schurter.com
Changes that contribute to technical improvement are subject to alternations
Seite
Erstelldatum:
Ersteller:
Änderungsdatum:
Geändert von:
Änderungs-Nr.
Datenblatt Nr.
Index
21 of 22
05.11.2004
Ullmer
07.12.2010
Schillak
10321
105.9502
o
Print date: 10/12/2010 14:52:00
6 QUALIFICATION TEST
6.1 IP Protection Class
IP Protection Class IEC/DIN/EN/ 60529
IP 67
6.2 IK Protection Class
Tested Centrically
IK Protection Class DIN EN 50102
Mounting Diameter 16 mm
IK 06
IK Protection Class DIN EN 50102
Mounting Diameter 19, 22, 30 mm
IK 07
6.3 ESD Protection
ESD-Test according to DIN 61000-4-2:
4kV Contact Discharge
MSM ST
Ø 16; 19; 22; 30 mm
4kV Contact Discharge
MSM LE
Ø 16; 19; 22; 30 mm
6.4 Salt Spray Test
Salt spray test according to DIN 50021- SS
24h, 48h and 96h residence time
The surface of the stainless steel material is covered with a molecular-passive layer. Only under very
unfavourable conditions it is possible, that iron and rust molecules as well as base metals penetrate
the passive layer as foreign substances (pollutions) and initiate the rust process.
The smoothness of the actuator was not affected. After the residence time the tested samples were
cleaned under running water and all rust spots could be removed.