Brochure

78
Control and signaling units
Harmony XB5, plastic
Body/contact assemblies - Screw clamp terminal
connections
References
To combine with heads,
see pages
24 to 76
Body/xing collar
For use with Sold in
lots of
Unit
reference
Weight
kg/lb
Electrical block (contact or light) 10
ZB5AZ009 0.006/0.013
Contact functions (1)
Screw clamp terminal connections (Schneider Electric anti-loosening system)
Application Type of
contact
Description Sold in
lots of
Unit
reference
Weight
kg/lb
NO NC
Contacts for standard applications
Contact
blocks
Single Contact blocks 1 – 5 ZBE101 0.011/0.024
– 1 5 ZBE102 0.011/0.024
Double 2 – 5 ZBE203 0.020/0.044
– 2 5 ZBE204 0.020/0.044
1 1 5 ZBE205 0.020/0.044
Single with
body/xing
collar
1 – 1 ZB5AZ101 0.021/0.046
– 1 1 ZB5AZ102 0.021/0.046
2 – 1 ZB5AZ103 0.030/0.066
– 2 1 ZB5AZ104 0.030/0.066
1 1 1 ZB5AZ105 0.030/0.066
1 2 1 ZB5AZ141 0.040/0.088
Contacts for specic applications
Low power
switching
Single Standard 1 – 5 ZBE1016 0.012/0.026
– 1 5 ZBE1026 0.012/0.026
Dusty environment (2)
(IP 5X, 50 μm dust)
1 – 5 ZBE1016P 0.012/0.026
– 1 5 ZBE1026P 0.012/0.026
Staggered
contacts
Single Early make
NO
1 – 5 ZBE201 0.011/0.024
Late break
NC
– 1 5 ZBE202
0.011/0.024
Single with
body/xing
collar
Overlapping
NO+NC
1 1 5 ZB5AZ106 0.062/0.137
Staggered
NO+NO
2 – 5 ZB5AZ107 0.062/0.137
High power
switching
Single Standard (3) 1 – 1 ZBE501 0.020/0.044
– 1 1 ZBE502 0.020/0.044
2 – 1 ZBE503 0.032/0.071
– 2 1 ZBE504 0.032/0.071
1 1 1 ZBE505 0.032/0.071
Additional contact
blocks for high
power switching
Single Standard (4) 1 – 1 ZB2BE101 0.020/0.044
– 1 1 ZB2BE102 0.020/0.044
Clip-on legend holder, sheet of blank legends and labelling software
Description Sold in
lots of
Unit
reference
Weight
kg/lb
Clip-on legend-holder for electrical blocks with screw clamp terminal
connections(5). For identication of an XB4B control or signaling unit
10
ZBZ001 0.001/0.002
Sheet of 50 blank legends for legend holder ZBZ001 10
ZBY001 0.023/0.051
(1) The contact blocks enable variable composition of body/contact assemblies. Maximum number of rows possible:
3. Either 3 rows of 3 single contacts or 1 row of 3 double contacts + 1 row of 3 single contacts (double contacts
occupy the rst 2 rows). Maximum number of contacts is specied on 22 of this catalog.
(2) It is not possible to t an additional contact block on the back of these contact blocks.
(3) It is not possible to t an additional contact block on the back of these contact blocks or to use these contacts with
light blocks.
(4) To be tted on the back of ZBE50 p contacts.
(5) This legend holder is not compatible with high power switching
contacts .
ZB5AZ107
814667
814411
ZB5AZ101
814588
ZB5AZ009
ZBE101
XB4_632_CPODA18001
ZBE203
zbe203
ZBE201
101261
ZBE501
PF080706
ZB2BE101
PG114156SE
Presentation:
page 10
XB5_633_CDDPM18024
ZBZ001