Use and Care Manual

16
SHOWER SYSTEM
16
Schluter
®
-KERDI-DRAIN-A
Flange and adaptor ring measurements
ABS
5-1/4"
A 11-13/16" - 300 mm
B 2-13/32" - 60.7 mm
C 2-23/32" - 69.3 mm
D 5-1/4" - 133.4 mm
E 2-29/32" - 74 mm
F 1-1/64" - 25.9 mm
G 2-1/16" - 52.6 mm
ADAPTOR KIT — 5-1/4" or 7-1/2" ADAPTOR RING
5-1/4" (133.4 mm) adaptor ring
Flange and ring Item No.
KDA5 FLK ABS
7-1/2" (191 mm) adaptor ring
Flange and ring Item No.
KDA7 FLK ABS
Also included:
Height adjustment
collar for KERDI-
DRAIN grate
5-1/4" 7-1/2"
Flange and adaptor ring measurements
ABS
7-1/2"
A 11-13/16" - 300 mm
B 4-13/32" - 111.8 mm
C 4-11/16" - 118.9 mm
D 7-1/2" - 191 mm
E 5-7/64" - 130 mm
F 3-1/16" - 77.8 mm
G 3-41/64" - 92.4 mm
Additional components included
Inside
corners
4x
Outside
corners
2x
Pipe seal
(3/4" - 20 mm)
1x 1x
Mixing
valve seal
(4-1/2" - 114 mm)
KERDI-FIX
sealing and bonding
compound (3.38 oz – 100 ml)
1x
Schluter
®
-KERDI-DRAIN ADAPTOR KITS are used to convert traditional clamping ring drains to integrated bonding flange drains
when removal of the clamping ring drain is not practical. A stainless steel adaptor ring with an overmolded rubber gasket replaces
the clamping ring and is sealed to the existing drain body using Schluter
®
-KERDI-FIX. The bonding flange then slides into the adaptor
ring and seals against the rubber gasket. Adaptor kits are suitable for both mortar bed and Schluter
®
-KERDI-SHOWER-T/-TS/-TT
shower tray applications.
Also included:
Lateral adjustment
ring for KERDI-
DRAIN grate
The tileable grate and the 6" round/square
grates are NOT compatible with the
5-1/4" ring flange.
i