Schluter-BEKOTEC Technical Data Sheet

ManualsBrandsSchluter ManualsHeatingBEKOTEC-BRS/KF - Poured Screed Edge Strip - Adhesive Leg - 3-1/8" Width - 5/16" Thickness - 82' Length

INNOVATIVE SOLUTIONS FOR CERAMIC AND STONE TILE

FINISHING, EDGE PROTECTION, AND GUTTER SYSTEM

Ceramic and stone tiles are ideal surface

coverings for the exterior and have

been used successfully in outdoor

applications for thousands of years.

Exterior balconies and terraces provide

excellent opportunities for the installation

of tiled surfaces. The Schluter

BARA/-BARIN products provide edge

finishing and a gutter system for water

management at balcony and terrace

perimeters.

Application and Function

Edge-finishing Profiles

5.3 Schluter

-BARA-RW is a stainless

steel or color-coated aluminum, L-shaped

edging profile for balconies and terraces.

The profile provides a neat edge appearance

while concealing and protecting the

exposed edges of the setting bed against

weathering and corrosion.

Schluter

-BARA-RW is suitable for the

renovation of balconies and terraces

where a tile covering is to be installed onto

an existing substrate using the thin-bed

method. The profile is solidly embedded

into the thin-set mortar and integrated into

the bonded waterproof layer.

Schluter

-BARA-RW is available with

a special radius perforation “R” so that

the profile can be used to form curves.

Matching outside corners and connector

pieces are available.

5.15 Schluter

-BARA-RWL is a color-

coated aluminum, L-shaped finishing profile

for large-format pavers that are laid on loose

gravel layers or stilted assemblies above a

waterproofing layer and drainage layer.

The trapezoid-perforated anchoring leg

of Schluter

-BARA-RWL is placed along

the edge, on top of the waterproofing

layer, and adjusted to the proper height

and alignment. The vertical finishing leg

covers the edge of either the entire surface

assembly or just the gravel layer or stilts.

Profile heights from 9/16" to 5-29/32"

(15 to 150 mm) allow for any type of

edge formation. Drainage holes, spaced

at approximately 2-15/16" (75 mm),

are incorporated at the transition of the

BALCONY AND

TERRACE PROFILES

5.3 Schluter

-BARA-RW

5.5 Schluter

-BARA-RAK

5.15 Schluter

-BARA-RWL

5.9 Schluter

-BARA-RTK

5.1 Schluter

-BARA-ESOT

5.11 Schluter

-BARA-RTP

5.4 Schluter

-BARA-RK

10.1 Schluter

-BARIN

Summary of content (12 pages)

PAGE 1
b a l conY an d t e r r a ce P r of il e s Innovative solutions for ceramic and stone tile Fi n i s h i n g , E d g e P r o t e c t i o n , a n d G u t t e r S y s t e m Ceramic and stone tiles are ideal surface coverings for the exterior and have been used successfully in outdoor applications for thousands of years. Exterior balconies and terraces provide excellent opportunities for the installation of tiled surfaces.
PAGE 2
b alc o n Y an d t er r ac e Pr ofile s anchoring leg and the finishing leg to ensure the proper drainage of any collecting seepage water. Schluter®-BARA-RWL is available with a special radius perforation “R” so that the profile can be used to form curves. 5.4 Schluter®-BARA-RK is a T-shaped edging profile for balconies and terraces. The profile provides a neat edge appearance while concealing and protecting the exposed edges of the mortar bed against weathering and corrosion.
PAGE 3
balconY and te rra c e Pro f i l e s Schluter®-BARIN gutter components, including covers, end caps, corners, and connectors, are made of color-coated aluminum. Base Support Profile 5.1 Schluter®-BARA-ESOT is a stainless steel right-angle support profile for attaching base tiles to non-load-bearing substrates. These substrates include metal flashing or bituminous waterproofing layers that are used at floor/wall transitions on balconies and terraces.
PAGE 4
b alc o n Y an d t er r ac e Pr ofile s 5.3 Schluter®-BARA-RW 1. Select Schluter®-BARA-RW according to the thickness of the setting bed (i.e., the height of the floor assembly to be covered). Prefabricated corners and connectors are available for inside corners, outside corners, and butt joints. Abut the ends of the profile, leaving an approx. 3/16" (5 mm) joint. Cover the joint with the clip-on connector. 2. Using a notched trowel, apply thin-set mortar to the area where BARA-RW is to be placed.
PAGE 5
balconY and te rra c e Pro f i l e s waterproofing layer may consist of a drainage membrane with a loaddistribution layer (e.g., mortar bed) on top, a gravel layer, or large-format pavers supported by pedestals or stilts. 6. Please note: Prefabricated corners and connectors are available for inside corners, outside corners, and butt joints. Abut the ends of Schluter®BARA-RAK or -RTK, leaving an approx. 3/16" (5 mm) joint. Cover the joint with the clip-on connector. 7.
PAGE 6
b alc o n Y an d t er r ac e Pr ofile s Product Item Numbers *Color Codes 5.3 Schluter®-BARA-RW Item No. H = in. - mm 3-1/2" - 90 mm =H Outside corner 10-1/8" - 25.5 cm Aluminum, color-coated 9/16" - 15 mm RW 15 E RW 15 color* 1" - 25 mm RW 25 E RW 25 color* 1-3/16" - 30 mm RW 30 E RW 30 color* 1-9/16" - 40 mm RW 40 E RW 40 color* 2-3/16" - 55 mm RW 55 E RW 55 color* - 75 mm RW 75 E RW 75 color* 3-3/4" - 95 mm RW 95 E RW 95 color* 3" Connector Stainless steel 304 (1.
PAGE 7
balconY and te rra c e Pro f i l e s 5.4 Schluter®-BARA-RK 3-1/8" - 80 mm 2-5/8" - 65 mm 1-9/16" - 40 mm 3/4" - 20 mm Outside corner, 90° 5.4 Schluter®-BARA-RK Item No. Accessories Item No. Aluminum, color-coated Outside corner, 90O E90 / RK 65 color* Outside corner, 135O E135 / RK 65 color* Inside corner, 90O I90 / RK 65 color* Connector V / RK 65 color* RK 65 color* Length supplied: 8' 2-1/2" — 2.
PAGE 8
b alc o n Y an d t er r ac e Pr ofile s 4-5/16" - 110 mm 3-11/32" - 85 mm 1-1/4" - 32 mm 2-1/2" - 63 mm 5.9 Schluter®-BARA-RTK 3/8" 1-1/32" 3/8" - 10 mm, 1-1/32" - 26 mm Outside corner, 90° 5.9 Schluter®-BARA-RTK Item No. Accessories Item No. Aluminum, color-coated Outside corner, 90O E90 / RTK 30 color* Outside corner, 135O E135 / RTK 30 color* Inside corner, 90O I90 / RTK 30 color* Connector V / RTK 30 color* RTK 30 color* Length supplied: 8' 2-1/2" — 2.
PAGE 9
balconY and te rra c e Pro f i l e s 5.1 Schluter®-BARA-ESOT Item No. H = in. - mm =H 93º Stainless steel 304 (1.4301 = V2A) (E) 2-3/8" - 60 mm ESOT 60 4-3/8" - 110 mm ESOT 110 Length supplied: 8' 2-1/2" — 2.50 m 2-3/8" - 60 mm 8.3 Schluter®-KERDI-FIX (sealant) Item No. KERDIFIX / color* *Color Codes Cartridge Volume BW 9.81 oz (290ml) 8.3 Schluter®-KERDI-FIX Bright white (sealant) Item No. KERDIFIX/SB/G G Grey To complete the item number, add the color code (e.g., KERDIFIX / BW).
PAGE 10
1-3/16" - 30 mm adjustment r = 1-9/16" - 40 mm variable 5-5/16" - 6-1/2" 135 mm - 165 mm b alc o n Y an d t er r ac e Pr ofile s 10.1 Schluter®-BARIN-SR 3-3/8" - 86 mm 3/8" - 10 mm Gutter system (color-coated aluminum) BARIN Gutter set, 8' 2" - 2.50 m 1 Gutter, 8' 2" - 2.50 m 1 of each, Cover profile, 8' 2" - 2.50 m & 1' 7" - 0.50 m 1 Connector 6 Screws BSR4 R 250 color* BARIN Gutter set, 4' 11" - 1.50 m 1 Gutter, 4' 11" - 1.50 m 1 of each, Cover profile, 4' 11" - 1.50 m & 1' 7" - 0.
PAGE 11
balconY and te rra c e Pro f i l e s 14 15 13 11 13 12 16 17 11 10.1 Schluter®-BARIN-R Pipe systems (color-coated aluminum) Down pipe 3' 3" - 1 m 8' 2" - 2.50 m Item No.
PAGE 12
Schluter®-Systems Balcony and Terrace Profiles 5-Year Limited Warranty COVERAGE AND CONDITIONS: Subject to the conditions and limitations as stated hereinafter, Schluter-Systems* warrants that Schluter®-Systems Balcony and Terrace Profiles (the “Products”)** will be free from manufacturing defects for a period of five (5) years from the date of purchase and only when the Products are used and installed in accordance with the terms and conditions of the Schluter®-Systems Balcony and Terrace Profiles Technica