User's Manual

15956 Rev. 0
12/10/98 3:36 PM
16
8 Repeat Steps 5 through 7 for each pair of wires.
9 Tuck the Scotchloks into the splice enclosure and route the cables through the cutouts at the
ends of the splice enclosure (Figure 2.16).
10 Coat the inside of the splice enclosure with Dow Corning #4
® or GE Novaguard GB24 ®
moisture protection compound (Figure 2.17).
11 Close the splice enclosure, pressing it firmly until the teeth lock together
(Figure 2.18).