OPERATOR'S MANUAL

ManualsBrandsScania ManualsOtherScania DC13 industrial engine Operator's manual

Table Of Contents

Start-up Report – Warranty
Introduction
Environment and safety
- Environmental responsibility
- Safety
- Warnings and advisories
- Certification
Scania engines engine warranty for industrial engines
- Emission control systems warranty
- Emission control system warranty statement
California emission control warranty statement
- Your warranty rights and obligations
- Manufacturer's warranty coverage
- Owner's warranty responsibilities
SCR catalytic converter
Engine data plate
Component identification
- SCR system
Starting and running
- Checks before running
- Reductant pump
- Starting the engine
- Running
- Engine shutdown
- Checks after running
Maintenance
- Engines with few hours of operation
- Cleaning the engine
- Maintenance intervals
- Biodiesel (FAME)
Lubrication system
- Oil grade
- Oil analysis
- Checking oil level
- Changing the oil
- Labels for top-up engine oil grade
- Parts
- Cleaning the centrifugal oil cleaner
- Operational testing
- Renewing the oil filter
Cooling system
- Coolant
- Checking coolant level
- Checking antifreeze and corrosion inhibitor
- Antifreeze and corrosion inhibitor
- Changing coolant
- Cleaning the cooling system
Air cleaner
- Reading the vacuum indicator
- Renewing the filter element
- Renewing the safety cartridge
Fuel system
- General information on the XPI system
- Checking fuel level
- Renewing the fuel filter with draining nipple
- Renewing the fuel filter using a suction tool
- Bleeding the fuel system using a suction tool
Miscellaneous
- Checking the drive belt
- Checking for leaks
- Checking and adjusting the valve clearance
- Renewing the reductant filter
- Cleaning the reductant tank filler filter
- Cleaning the reductant tank ventilation filter
Diesel
- Composition of the fuel
- Sulphur content of fuel
- Temperature dependency of the fuel
Reductant for SCR
- Responsibility and quality requirements
- Properties
Preparing the engine for storage
- Handling the engine
- Preservative coolant
- Preservative fuel
- Preservative oil
- Preparations for storage
Technical data
- General data
- Lubrication system
- Injection system
- Cooling system
- Intake system
- Electrical system
Scania Assistance

OPM 200 en-GB 20

Scania CV AB 2015, Sweden

Component identification

1. Engine data plate

2. EGR valve

3. Exhaust brake

4. Actuator

5. Turbocharger

6. EGR cooler

7. Oil cooler

8. Oil filter

9. Engine serial number on the cylinder

block

10. Coolant pump

11. Draining coolant

12. Centrifugal oil cleaner

13. Oil filler

14. Engine control unit

15. Water separating prefilter for fuel

16. Hand pump for fuel

17. Fuel filter

18. Starter motor

19. Oil dipstick

20. Oil plug

348 423

234567 8 9

15 16 17 13

1920

The illustration shows a normal version of a DC13 engine. The engine ordered may have different equipment