User Manual

00:23-03 en-GB 45
©
Scania CV AB 2016, Sweden
Fuel system
Bleeding the fuel system us-
ing a suction tool
1. Open the bleed nipple at the high pressure
pump and connect a clear plastic hose from
the suction tool or similar tool.
2. Drain the suction tool. Hold the suction tool
straight and draw out a full container of fuel.
Bleeding is now complete.
3. Start the engine.
Bleeding the fuel system us-
ing a hand pump
1. Attach a clear plastic hose to the bleed nipple
on the fuel filter housing. Let the plastic hose
drop into a container that holds at least 5 li-
tres.
2. Loosen the hand pump handle.
3. Open the bleed nipple and pump until fuel
runs out, which will take around 100 pump
strokes. Close the bleed nipple.
4. Start the engine and open the bleed nipple
carefully. Approximately 3 litres will run out
into the container before the fuel coming out
will be free of air.
Designation Illustration
Suction tool
337 296
329 119