User Manual

00:23-03 en-GB 34
©
Scania CV AB 2014, Sweden
Fuel system
5.
Make a mark on the pressure filter cover (B).
Unscrew the cover 3 to 4 turns using a socket
wrench with hexagon driver, e.g. 588 475.
Draw out fuel which may drain into the water
separating suction filter housing when the
pressure filter is detached.
IMPORTANT!
Wait a minimum of 2 minutes to allow as much
of the fuel as possible to drain out of the filter
housing.
6. Unscrew the pressure filter cover (B) and lift
it up slowly with the filter element.
7. Fuel from the pressure filter housing (B) will
flow into the water separating suction filter
housing (A). Leave the suction tool in the
water separating suction filter housing (A)
until it is completely drained of fuel.
8. Move the suction tool to the pressure filter
housing (B). Draw out remaining fuel and
particles.
IMPORTANT!
It is important to remove remaining fuel and par-
ticles from the filter housings to prevent fuel sys-
tem contamination.
9. Undo the old filter elements from the covers
by carefully bending them to one side.
329 086
B
329 087
B
A
329 088
B