Installation Sheet

ASSEMBLY AND INSTALLATION

INSTRUCTION

Please read carefully and save this instruction, as

you may need them at a later date.

CAUTION

Turn off the main power at the circuit breaker before installing the

fixture, in order to prevent possible shock. If you are unfamiliar with

proper electrical wiring connections, please consult of a qualified

electrician before installing.

Installing Step:

Remove the fixture and the mounting package from the box and make sure that

no parts missing in the box.

1.Put the arm to equal distribution

2.Thread the Loop (B) into fixture body(A) .

3. Put the Frames (E) onto the Center tube(C), then tighten the ball nut(D).

4. Put the the Center tube(C) onto the Fixture body (A).

5. Put the Cup(K),Hex nut (H),Steel washer(I),Rubber washer (J), Glass shade(L),onto the

Support(M),the tighten the Hex nut(H).

6. Put the Glass shade(L).,Support(M) Tube(F) onto the Fixture body (A),then tighten the

Finial (F).

7.Install bulbs: (Bulbs not including in the package) .

(Please don’t exceed the maximum capacity that recommended on the Sockets)

INSTALLATION IS NOW COMPLETED.

3-333-3-13

3-333-3-SN

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTION Please read carefully and save this instruction, as you may need them at a later date. CAUTION A Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock. If you are unfamiliar with proper electrical wiring connections, please consult of a qualified electrician before installing. G C D Installing Step: E Remove the fixture and the mounting package from the box and make sure that no parts missing in the box.