Installation Sheet

ASSEMBLY INSTRUCTIONS
ITEM NO.: 1-2653-8-149
B
F*9PCS
D
A
E
F
C
A
B → A → C → D → E → F → Bulb
1. Carefully unpack and identify all parts referring to illustration for parts identification.
2. Turn the power to the installation point OFF.
3. Unfold the arms of the fixture body (A) to locations.
4. Thread the bottom of center column (B) onto the coupling at top of fixture body (A). Hand
tighten until snug.
5. Place top assembly (C) through the nipple of the center column (B), securing with fixture loop
(D). And meantime Carefully attach the bottom end of string of crystal beads of top assembly
(C) to the fixture body (A)
6. Install finial (E) onto the protruding nipple of the bottom of fixture body (A).
7. Carefully attach the crystal beads (F) to the hook of finial (C) and to the small hole of fixture
body (A), as shown in the diagram.
8. Referring to the installation instruction with the product for the wiring and installation.
9. Install proper bulbs (NOT provided) to the sockets referring to the marking and/or labels on
the fixture for maximum wattage.
10. Restore the power to the installation point ON.
11. Assembly is completely. Retain this sheet for future reference.