sauder.com Sweet stand. Sweet dreams. Night Stand Cannery Bridge Collection | Model 416868 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-15 Français pg 16-18 Español pg 19-21 Lot # 376212 09/16/15 Purchased: __________________ Be sure to give us a ring before making any returns.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4 5-15 Hammer Français 16-18 Español 19-21 Safety 22 Warranty 23 Page 2 Not actual size Skip the power trip. This time. 416868 www.sauder.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. To begin assembly, push a SAUDER TWIST-LOCK® FASTENER (10F) into the large holes in the ENDS (A2 and B2) and BOTTOM (D). Scan this QR code or go to this address: http://qr.sauder.com/?ID=1258 to watch a video on how to assemble your unit. Do not tighten the TWIST-LOCK® FASTENERS in this step.
Step 2 å å Turn six CAM SCREWS (8F) into the FRONT LEGS (F). Remember: Righty tighty. Lefty loosey. Push six HIDDEN CAMS (1F) into the ENDS (A2 and B2). (6 used) NOTE: Position the LEGS exactly as shown. 8F F F Arrow 1F Su TW rfa FA IS ce w ST T-L ith EN OC ER K® S A2 Arrow Su TW rfa FA IS ce w ST T-L ith EN OC ER K® S B2 Hole Arrow The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. 1F Page 6 416868 www.sauder.
Step 3 å Fasten the FRONT LEGS (F) to the ENDS (A2 and B2). Tighten six HIDDEN CAMS. å Fasten the BACK LEGS (G) to the ENDS (A2 and B2). Use six BLACK 2-1/4" FLAT HEAD SCREWS (26S). å NOTE: Be sure to use the exact holes shown in the BACK LEGS. 1 2 26S BLACK 2-1/4" FLAT HEAD SCREW (6 used for the BACK LEGS) These surfaces should be even. F A2 Su TW rfa FA IS ce w ST T-L ith EN OC ER K® S These surfaces should be even.
Step 4 å Fasten the UNIVERSAL CABINET RAILS* (35AA) to the ENDS (A2 and B2). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3. å *patent pending glide system 3S GOLD 5/16" FLAT HEAD SCREW (4 used in this step) Glide end 1 2 F 3 Su TW rfa FA IS ce w ST T-L ith EN OC ER K® S A2 3 2 1 F Su TW rfa FA IS ce w ST T-L ith EN OC ER K® S B2 Glide end Page 8 416868 www.sauder.
Step 5 å Fasten the LEFT END (B2) to the TOP (C). Tighten two TWIST-LOCK® FASTENERS. å Fasten the BOTTOM (D) to the LEFT END (B2). Tighten two TWIST-LOCK® FASTENERS. Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. Notched edge F C ith e w K® c a C f Sur T-LO S S I R TW TENE FAS B2 Su witrface hh ole s These edges should be even. D Dowel end Sur f TW ace wi IS th FAS T-LO TEN CK® ERS How to use the SAUDER TWIST-LOCK® FASTENER 1.
Step 6 å Slide the BOTTOM MOLDING* (J) onto the notched edge of the BOTTOM (D). å Fasten the RIGHT END (A2) to the TOP (C) and BOTTOM (D). Tighten four TWIST-LOCK® FASTENERS. å *U.S. Patent No. 5,499,886 Hey! It's starting to look like something! Notched edge C Slide the BOTTOM MOLDING (J) onto the notched edge. J D F u itho w e ® fac CK Sur T-LO S IS TW TENER FAS Page 10 416868 t A2 www.sauder.
Step 7 å NOTE: If your unit is not located against a wall, you have the option of attaching the back with the finished surface facing out. Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. å Carefully turn your unit over onto its front edges and lay the BACK (E) over your unit. å Make equal margins along the top and side edges of the BACK (E). Push on opposite corners of your unit if needed to make it "square".
Step 8 VIEW THE T-LOCK BOX VIDEO 1 2 The tabs should insert freely into the slots. Gently tilt the DRAWER SIDES side to side until the tabs slip into the slots. With the palm of your hand, tap the DRAWER BOTTOM down into the groove. Un fi su nish rfa ed ce D964 D12 D12 D13 H D13 H Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. Groove å Insert the DRAWER SIDES (D12 and D13) at an angle into the slot at each end of the DRAWER FRONT (H).
Step 9 å å Insert a SLIDE CAM (10A) into the DRAWER SIDES (D12 and D13). å å å å NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT" for easy identification. Fasten a DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D12) and a DRAWER LEFT (35AD) to the LEFT DRAWER SIDE (D13). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2. NOTE: The glides are not intended to rotate. NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Step 10 å å Carefully stand your unit upright. å To insert the drawer into your unit, tip the front of the drawer down and drop the glides on the drawer behind the glides on the unit. Lift the front of the drawer up and slide it into the unit. Pro Tip: Lift with your legs. And, you know, your arms. Push a CAM COVER (36P) onto each visible HIDDEN CAM. 40 lbs. 15 lbs. 30 lbs. 36P (6 used) To cover HIDDEN CAMS Page 14 416868 www.sauder.
Step 11 å To make adjustments to the drawer, loosen SCREW #2 in the SLIDES a 1/4 turn, then turn the CAM clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn the CAM. The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front. By adjusting the drawer this way, it will help the DRAWER FRONT line up better when closed. Tighten the SCREW when finished with adjustments.
Modèle 416868 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 5 Ne pas serrer les FIXATIONS TWIST-LOCK® à cette étape. Attention: Ne pas relever l'élément dans sa position verticale avant d'avoir fixé l’ARRIÈRE. L'élément risque de s'effondrer. Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Pour commencer l'assemblage, enfoncer une FIXATION TWIST-LOCK® SAUDER (10F) dans les gros trous des EXTRÉMITÉS (A2 et B2) et le DESSOUS (D). Fixer l'EXTRÉMITÉ GAUCHE (B2) au DESSUS (C).
ÉTAPE 8 ÉTAPE 10 1. Insérer les CÔTÉS DE TIROIR (D12 et D13) en biseau dans la fente dans chaque extrémité du DEVANT DE TIROIR (H). Relever, avec précaution, l'élément dans sa position verticale. 2. Enfiler le FOND DE TIROIR (D964) dans les rainures des CÔTÉS DE TIROIR (D12 et D13) et du DEVANT DE TIROIR (H). 3. Fixer l'ARRIÈRE DE TIROIR (D158) aux CÔTÉS DE TIROIR (D12 et D13). Utiliser quatre VIS TÊTE PLATE 40 mm NOIRES (30S).
Modelo 416868 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 5 No apriete los SUJETADORES TWIST-LOCK® en este paso. Precaución: No coloque la unidad en posición vertical hasta que se fije el DORSO. La unidad podría caerse. Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Para comenzar el ensamblaje, empuje un SUJETADOR TWIST-LOCK® SAUDER (10F) dentro de los agujeros grandes de los EXTREMOS (A2 y B2) y del FONDO (D). Fije el EXTREMO IZQUIERDO (B2) al PANEL SUPERIOR (C).
PASO 8 PASO 10 1. Inserte los LADOS DE CAJÓN (D12 y D13) en ángulo dentro del encaje en cada extremo de la CARA DE CAJÓN (H). Cuidadosamente ponga la unidad en posición vertical. 2. Deslice el FONDO DE CAJÓN (D964) en las ranuras de los LADOS DE CAJÓN (D12 y D13) y de la CARA DE CAJÓN (H). 3. Fije el DORSO DE CAJÓN (D158) a los LADOS DE CAJÓN (D12 y D13). Utilice cuatro TORNILLOS NEGROS DE CABEZA PERDIDA de 40 mm (30S).
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded drawers and shelves. • Risk of injury. • Never exceed the weight limits shown in • Top-heavy furniture can tip over. the instructions. • Overloaded drawers or shelves can break. • Work from bottom to top when loading shelves and drawers.
5-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
