sauder.com Guaranteed to hold other beverages, too. Lift-Top Coffee Table Edge Water Collection | 414856 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4 5-19 Hammer Français 20-22 Español 23-25 Not actual size Adjustable Wrench Safety 26 Warranty 27 Page 2 Skip the power trip. This time. 414856 www.sauder.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. Scan this QR code or go to this address: http://qr.sauder.com/?ID=1440 to watch a video on how to assemble your unit. Push thirty-six HIDDEN CAMS (1F) into the ENDS (A and B), BOTTOM (E), SHELF (F), PANELS (G), and SKIRTS (L).
Step 2 å Turn twenty-two CAM SCREWS (20F) into the LEGS (H2 and I2) and SKIRTS (L). (22 used) L 20F L H2 H2 I2 I2 20F Page 6 414856 www.sauder.
Step 3 å å Fasten the LEGS (H2 and I2) to the ENDS (A and B). Tighten eight HIDDEN CAMS. Remember: Righty tighty. Lefty loosey. Fasten four FEET (M) to the LEGS (H2 and I2). Use four BLACK 1-7/8" PAN HEAD SCREWS (16S). These edges must be even. H2 S H urf ID a D ce E w N i C th A M S A These edges must be even. Smaller hole M I2 Smaller hole H2 M S H urf ID a D ce E w N i C th A M S B Smaller hole M I2 16S Smaller hole 1 www.sauder.
Step 4 Fasten the SHELF (F) to the PANELS (G). Tighten six HIDDEN CAMS. Holes on the other surface are closer to this edge. S H urf ID a D ce E w N i C th A ou M t S å G F ith ew c a f Sur S AM C DEN HID G S H urf ID a D ce E w N i C th A M S Holes are closer to this edge. Caution Risk of damage or injury. HIDDEN CAMS must be completely tightened. HIDDEN CAMS that are not completely tightened may loosen, and parts may separate.
Step 5 å Fasten the SKIRTS (L) to the BOTTOM (E). Tighten six HIDDEN CAMS. Flat edge e fac r u S S EW CR S M CA with Flat edge S H urf ID a D ce E w N i C th A M S L E e fac r u S S REW C S AM C t ou with L The bottom edges should be even. www.sauder.
Step 6 å Fasten the BOTTOM (E) to the UPRIGHTS (C). Use four BLACK 1-7/8"FLAT HEAD SCREWS (2S). Edge with smaller holes C C withMS e c fa A Sur DEN C HID E Edge with smaller holes 2S BLACK 1-7/8" FLAT HEAD SCREW (4 used in this step) Page 10 414856 www.sauder.
Step 7 å å Insert four METAL PINS (1R) into the SHELF (F). Don't worry. It isn't Rome. This can be built in a day. Then, push the UPRIGHTS (C) onto the METAL PINS (1R) in the SHELF (F). C C 1R 1R F G G www.sauder.
Step 8 å Fasten the ENDS (A and B) and LEGS (H2 and I2) to the BOTTOM (E), SHELF (F), and SKIRTS (L). Tighten twelve HIDDEN CAMS. å NOTE: The HIDDEN CAMS in the PANELS (G) will be tightened in Step 10. Maximum 210 degrees Arrow Minimum 190 degrees H2 L B E I2 L I2 A Surface without holes F G G H2 Do not tighten the HIDDEN CAMS onto these CAM SCREWS at this time. Do not tighten these HIDDEN CAMS at this time. Page 12 414856 www.sauder.
Step 9 å Fasten the FOOT SPACERS (K) to the BOTTOM (E). Use four BROWN 1" FLAT HEAD SCREWS (12S). å Push two PLASTIC FEET (23E) into the FOOT SPACERS (K). K E 23E K 23E 12S BROWN 1" FLAT HEAD SCREW (4 used in this step) www.sauder.
Step 10 å å Carefully stand your unit upright. å å Push six BUMPERS (2M) into the PANELS (G) and LEGS (H2 and I2). Pro Tip: Lift with your legs. And, you know, your arms. Fasten the PANELS (G) to the LEGS (H2 and I2). Tighten four HIDDEN CAMS. Push a CAM COVER (12P) onto each visible HIDDEN CAM. 2M I2 Tighten four HIDDEN CAMS in the PANELS (G). B H2 G G H2 I2 A 12P (18 used) To cover HIDDEN CAMS Page 14 414856 www.sauder.
Step 11 å Fasten the LIFT TABLE MECHANISMS (23M) to the TOP (D). Use six BLACK 9/16" LARGE HEAD SCREWS (1S). å NOTE: Be sure to position the LIFT TABLE MECHANISMS on the TOP exactly as shown. 1S BLACK 9/16" LARGE HEAD SCREW (6 used in this step) 23M The holes are closer to this edge. 23M D www.sauder.
Step 12 å Fasten the SUPPORT BRACKETS (37G) to the LIFT TABLE MECHANISMS (23M). Use four WASHERS (13M), NUTS (24M), and BLACK 3/4" MACHINE SCREWS (92S). 92S 24M 13M BLACK 3/4" MACHINE SCREW (4 used in this step) 37G 23M D 23M 37G 24M Page 16 414856 13M www.sauder.
Step 13 å å IMPORTANT: You will need someone's help in this step. å å NOTE: Be careful when lining up the holes in the MECHANISMS with the holes in the ENDS as to not damage any parts. å NOTE: Do not overtighten the SCREWS (85S). Fasten the TOP (D) to the ENDS (A and B). Use ten BLACK 9/16" LARGE HEAD SCREWS (1S) through the LIFT TABLE MECHANISMS (23M) and into the holes in the ENDS. Fasten the BUSHINGS (91M) to the ENDS (A and B).
Step 14 å Fasten the BRACE (J) to the SUPPORT BRACKETS (37G) on the LIFT TABLE MECHANISMS (23M). Use four WASHERS (13M), NUTS (24M), and BLACK 1-1/4" MACHINE SCREWS (93S). å NOTE: Use the crescent wrench in this step. 93S BLACK 1-1/4" MACHINE SCREW (4 used in this step) 13M 24M J 37G 23M 24M 23M 13M 37G Page 18 414856 www.sauder.
Step 15 å å å IMPORTANT: Do not place valuables in the storage space. NOTE: Please read the back pages of the instruction booklet for important safety information. This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. And to celebrate, why not share your success story? 40 lbs. 25 lbs. 40 lbs. www.sauder.
414856 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 7 Ne pas serrer les EXCENTRIQUES ESCAMOTABLES dans cette étape. Insérer quatre GOUPILLES EN MÉTAL (1R) dans la TABLETTE (F). Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Enfoncer ensuite les MONTANTS (C) sur les GOUPILLES EN MÉTAL (1R) situées dans la TABLETTE (F). Enfoncer trente-six EXCENTRIQUES ESCAMOTABLES (1F) dans les EXTRÉMITÉS (A et B), le DESSOUS (E), la TABLETTE (F), les PANNEAUX (G) et les PLINTHES (L).
ÉTAPE 12 ÉTAPE 14 Fixer les CONSOLES DE SUPPORT (37G) sur les MÉCANISMES DE LEVAGE DE TABLE (23M). Utiliser quatre RONDELLES (13M), ÉCROUS (24M) et VIS À MÉTAUX 19 mm NOIRES (92S). Fixer l’ENTRETOISE (J) sur les CONSOLES DE SUPPORT (37G) sur les MÉCANISMES DE LEVAGE DE TABLE (23M). Utiliser quatre RONDELLES (13M), ÉCROUS (24M) et VIS À MÉTAUX 32 mm NOIRES (92S). ÉTAPE 13 REMARQUE : Utiliser la clé à molette à cette étape. IMPORTANT : Faire appel à une autre personne pour cette étape.
414856 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 7 No apriete los EXCÉNTRICOS ESCONDIDOS en este paso. Inserte cuatro ESPIGAS DE METAL (1R) en el ESTANTE (F). Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. A continuación, inserte los PARALES (C) sobre las ESPIGAS DE METAL (1R) en el ESTANTE (F). Empuje treinta y seis EXCÉNTRICOS ESCONDIDOS (1F) en los EXTREMOS (A y B), el FONDO (E), el ESTANTE (F), los PANELES (G) y los FALDONES (L).
PASO 12 PASO 14 Fije los SOPORTES DE APOYO (37G) a los MECANISMOS DE ELEVACIÓN DE LA MESA (23M). Utilice cuatro ARANDELAS (13M), PERNOS (24M) y TORNILLOS NEGROS PARA METAL de 19 mm (92S). Fije la RIOSTRA (J) a los SOPORTES DE APOYO (37G) sobre los MECANISMOS DE ELEVACIÓN DE LA MESA (23M). Utilice cuatro ARANDELAS (13M), PERNOS (24M) y TORNILLOS NEGROS PARA METAL de 32 mm (93S). NOTA: En este paso, utilice la llave inglesa. PASO 13 IMPORTANTE: Necesitar la ayuda de otra persona para este paso.
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded shelves can break. • Never exceed the weight limits shown in the instructions. • Work from bottom to top when loading shelves. Place the heavier items on the lower shelves.
5-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
