Ultracompact 2.
General Introduction The Saramonic Blink500 is an incredibly lightweight, ultracompact and easy-to-use 2-person wireless microphone system for DSLR, Mirrorless and Video cameras, or mobile devices that delivers detailed, broadcast-quality sound. The system series is comprised of three different receivers. The RX receiver has a 3.5mm output and includes TRS and TRRS output cables, allowing it to work with any device with a 3.5mm audio input.
Product Structure 1. Blink500 RX: Clip-On and Shoe-Mountable Receiver 1 3 2 4 5 7 ④ Charge Indicator Solid Green Light = Charging Battery Light turns off when fully charged. ⑤ Line Out Connect the receiver to a DSLR or Mirrorless camera, camcorder, smartphone, tablet, mixer or amplifier with the supplied output cables. ⑥ Pairing Pin-Hole 6 ⑦ Belt Clip and Standard Cold Shoe Mount 2. Blink500 RXDi: Lightning Receiver ① Power Key Long press to turn on or off the receiver.
Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on. 4. Blink500 TX: Body-pack Transmitter with Microphone ③ Pairing Pin-Hole 1 ④ Antenna 2 3. Blink500 RXUC: USB-C Receiver 4 1 2 3 6 6 ① USB Type-C Connector ② Pairing Indicator Flashing Blue Light (every one second) = Unpaired Quick Flashing Blue Light (every 0.
Volume Functions: Indicates the volume setting in three stages. Adjust the audio level by the “+” and “-” buttons. Default is in the third stage. The transmitter mic will be muted if you turn down the volume till all the lights are turned off. Pairing Functions: Flashing Blue Light (every one second) = Unpaired Slow Flashing Blue Light (every three seconds) = Paired Successfully ③ 3.5mm Audio Input Connect to the supplied lavalier microphone.
3. Insert the pairing pin into the pairing pin-hole of RXDi or RXUC, press hard and the pair indicator should be quick flashing at every 0.5s. Press both the “+”and “-” button of transmitter TX simultaneously within 10 seconds. 4. The kit will be paired when the RX pair indicator is solid blue and the TX pair indicator is flash slowly. Note: To pair the second transmitter TX, just repeat the step 3 and 4. 5. You are ready to record. Specification Blink500 RXUC Transmission Type 2.
Blink500 RX Blink500 TX Transmission Type 2.4GHz Digital Frequency Transmission Type 2.4GHz Digital Frequency Modulation GFSK Modulation GFSK Operating Range Up to 164' (50m) Operating Range Up to 164' (50m) Audio Output Connector 3.5 mm Jack RF Output Power 10mW Audio Output level –60 dBV Polar Pattern Omnidirectional Power Requirements Built-in Li-ion Battery or USB-C DC 5V Frequency Response 50Hz-18KHz Built-In Battery Life Approx.
Packing List Blink500 RX 1× Blink500 RX Receiver with Built-In Clip and Camera Shoe-Mount 1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRS Output Cable for Cameras 1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRRS Output Cable for Smartphones and Tablets 1× 1’ (30.
2× SR-M1 Omnidirectional Lavalier Microphones 2× Alligator-Style Lavalier Microphone Clips 2× Foam Lavalier Windscreens 1× Pairing Pin 1× Warranty Card 1× User Manual Blink500 B3(TX+RXDi) 1× Blink500 RXDi Receiver with MFi Certified Apple Lightning Connector 1× Blink500 TX Transmitter with Built-In Microphone and Clip 1× SR-M1 Omnidirectional Lavalier Microphone 1× Alligator-Style Lavalier Microphone Clip 1× Foam Lavalier Windscreen 1× 1’ (30.
Common Technical Issues and Solutions If you encounter problems when using the Blink500 system, please refer to the follow checklist before contacting technical support. If the problem cannot be solved, please contact the dealer's after-sales service department. Problems Causes Solutions The RX/TX cannot be turned on The battery is very low. Charge the RX/TX with the supplied charging cable. The battery become drained quickly The device is being used under cold or hot conditions.
www.saramonic.com Saramonic is a trademark registered and owned by Shenzhen DSQN Investment CO., LTD. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN ) Room 2009, Shenzhou Bairuida Bldg, Banxuegang Road, Bantian Street, Longgang District, Shenzhen, China 518129 Email: info@saramonic.
