Owner`s manual

Setting

Factory default

This function returns all setting values except for the User

logo, PIN code lock, Logo PIN code lock and Filter

counter to the factory default settings.

Factory default

Warning log

This function records anomalous operations while the

projector is in operation and use it when diagnosing faults.

Up to 10 warning logs are displayed with the latest warning

message at the top of the list, followed by previous warning

messages in chronological order.

Note:

When the Factory default function is executed, all the

warning log records will be deleted.

This function is used to set a frequency for the filter

cleaning.

When the projector reached a specified time between

cleanings, a Filter warning icon appears on the screen,

notifying the cleaning is necessary. After cleaning the filter,

be sure to select Filter counter reset and set the timer. The

Filter warning icon will not turn off until the filter counter is

reset.

For details about resetting the timer, refer to "Resetting the

Filter Counter" on page 63.

Filter counter

Press the SELECT button to select Timer and

then use the Point ▲▼ buttons to set the timer.

Select from (Off/100H/ 200H/ 300H) depending

on the use environment.

Filter warning icon appears on the screen at a set time.

Fig.1 Filter warning icon

Note:

•This icon also appears at turning on.

•The Filter warning icon (Fig.1) will not

appear when the Display function is set

to Off (p.47), during “Freeze”(p.26), or

"No show" (p.27).