User Manual

ManualsBrandsSANYO ManualsSecurity ProductsMPXMD162

3-1 Sensor point not used

3-2 Sensor point A

3-2 Sensor point B

----------------

------AAAA------

----------------

------------BBBB

----------------

LEVEL:DAY†8 NIGHT†10 MODE:A

(LEVEL DAY)

4. Sensitivity level for

the day period (ex.: 8)

(LEVEL NIGHT)

4. Sensitivity level for the

night period (ex.: 10)

(MODE)

5. Sensor response mode

------- BBB

----- BB

AAAAA

BBB

LEVEL:DAY†8 NIGHT†10 MODE:A AND NB

(Fig. 1)

1, 2

(CAMERA SET) NO.06

TITLE

--------

DAY NIGHT

PROGRAM REC OFF OFF

MON.MASK OFF OFF

SEQUENCE 1 S 1 S

VIDEO LOSS ON

SENSOR SET : PRESS NEXT

CAMERA SETTING Menu 7

Setting the video sensor area position,

sensitivity level and response mode

1 Press the SELECT (1 – 16) button to select the desired

camera (ex: camera 6).

2 Press the NEXT button.

The live picture from the selected camera and the video

sensor setting screen for that camera are displayed.

3 Set the video sensor area position.

Using the l, j, d and c buttons, move the cursor to the

desired position according to the picture in the background.

2 Using the + (or –) button, set A or B for the selected point.

Every time the + button is pressed, the setting will change as

follows:

A → B → - → A...

Repeat steps 1 and 2 to set all the desired video sensor

points of the desired area(s).

•

Set the desired point(s) to setting A or B.

•

– indicates a sensor point without any setting (there are

10 lines of 16 points each), that is not used as video

sensor.

•

To erase a line of video sensor points (A or B), move the

cursor to the line to erase, then press the MENU RESET

button.

4 Set the sensor sensitivity level.

Using the j (or l) button highlight the “LEVEL DAY” setting.

2 Press the c button, then using the + (or –) button set the

desired sensitivity level for the “DAY” period.

Follow the same procedure to set the desired sensitivity

level for the “NIGHT” period.

The available sensitivity levels are: OFF

1, 2, 3...10 (10 being the least sensitive, default setting), OFF.

NOTE:

The sensor sensitivity level can only be checked for the

time of the setting. (I.e., the night level setting cannot be

checked during the day.)

5 Set the sensor response mode.

Press the c button to highlight the “MODE” setting.

2 Using the + (or –) button set the desired mode.

•

MODE A (default setting):

The video sensor will send a trigger when it detects movement

at the video sensor area points A.

•

MODE A and B:

Set points A and points B at a predetermined distance, so that

only large subjects, that are detected by both video sensor points

simultaneously send an alarm trigger. Smaller objects that are

detected only by one set of video sensor points at the time will not

send an alarm trigger.

•

MODE A and NB (Fig. 1):

Set the video sensor points A at the centre of the main area,

and video sensor points B at the periphery, where no movement

will be detected. A trigger will be sent when change is only

detected at the video sensor points A, not at the video sensor

points B. For example, if the whole screen (A and B) brightness

changes due to a change in lighting or sunrays, a trigger is not

sent. But, if a change is detected only at the centre of the

screen (A), a trigger is sent.

☞

Press the NEXT button to return to the (CAMERA

SET) menu display, or

☞

Press the EXIT button to exit the menu display.

L8FC5/US (MPX-CD162, MD162 GB) 2000. 8. 31

42 English