OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 1 OWNER’S MANUAL REMOTE CONTROL COLOR TV/MONITOR ST-21XS2S ST-21YS2S ST-21YS2BS ST-21YS22 ST-21YS22B ST-21KS2 ST-21KS2K ST-21KS22 ST-21KS22K ST-21SF1 ST-21SF1K ST-21VF1S ST-21VF1KS ST-21MS22 ST-21MS22T ST-21MS22B
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 2 Safety Precautions To prevent electrical shock, do not remove the back cover. This unit is fully transistorized and does not contain user-serviceable components. Report any problems to qualified service personnel. Avoid exposing the television receiver to direct sunlight and other source of the heat. Do not stand the television receiver directly on other products which give off heat. E.g. video cassette players, audio amplifiers.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 3 CONTENTS DESCRIPTION Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Front Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Operating Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . 7 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 4 FEATURES ❏ 181-channel frequency synthesizer tuner ❏ Cable ready ❏ Plug & Play (Automatic Setting Up Channels) ❏ Automatic channel search with manual skip ❏ Digital picture controls with on-screen display ❏ Picture mode (Personal/Dynamic/Natural/Eco/Game) Selection ❏ Audio/Video inputs ❏ Monitor output ❏ On/Off timers ❏ Channel recall ❏ Mute key ❏ Automatic power shut-off CARE AND CLEANING The surface of the cabinet can be damaged if not properly maintained.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 5 SPECIFICATIONS Picture Tube Size (measured diagonally) All Models: (21-inch) – 510 mm viewing screen Television System: NTSC 181 Channel Tuning System: VHF Channels 2-13 UHF Channels 14-69 Cable TV (CATV) 1,14 -125 Automatic Fine Tuning on VHF and Cable Channels Speakers: Model ST-21YS2/S/BS, ST-21KS2/K, ST-21SF1/K, ST-21VF1/S/KS, ST-21YS22/B, ST-21KS22/K, ST-21MS22/T/B: 5 x 9 cm, 2 pcs. Model ST-21XS2S: 5 x 9 cm, 2 pcs.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 6 FRONT CONTROL PANEL Model ST-21XS2S Press to open 3 2 1 VIDEO L-AUDIO-R TV/AV MENU 8 7 - + CH 5 6 4 Model ST-21YS2S, ST-21YS2BS, ST-21YS22, ST-21YS22B Press to open 32 1 AV2 IN VIDEO L-AUDIO-R 8 TV/AV MENU 7 6 - + CH 4 5 Model ST-21KS2, ST-21KS2K, ST-21KS22, ST-21KS22K Pull to open TV/AV MENU - POWER + 76 5 VIDEO CH 4 3 2 1 L-AUDIO-R 8 Model ST-21SF1, ST-21SF1K TV/AV MENU - 76 5 6 + POWER CH 4 3 2 1
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 7 FRONT CONTROL PANEL Model ST-21VF1S, ST-21VF1KS VIDEO TV/AV L-AUDIOR MENU - + CH POWER 76 5 8 3 2 1 4 Model ST-21MS22, ST-21MS22T, ST-21MS22B Press to open 3 2 1 VIDEO L-AUDIO-R 8 TV/AV MENU 7 6 - + CH 5 4 OPERATING CONTROL FUNCTIONS 1. MAIN POWER Switch Press to turn on the TV. Then the power indicator lights and the TV is ready for remote operation. 2.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 8 REMOTE CONTROL The remote control uses an invisible (infrared) light beam to operate the TV. Objects between the TV and the remote can block this light beam. Therefore, for correct operation the remote control must be pointed directly at the front of the TV with no obstructions. Point at the Front of TV INSTALLING BATTERIES The remote control requires two “AA” batteries (supplied). • • • Remove the battery compartment cover.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 9 REMOTE CONTROL KEYS OPERATION 1. DISPLAY Key Press once to display the channel number, off-time, on-timer or onchannel number by on-timer on the screen for 5 seconds Press again to remove the display. (See page 22.) This button also used to select the Colour System in AV Mode (See page 23.) 2. POWER Key Press to turn the TV On and Off. While the power indicator lights, the remote operation is available. 3.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 10 CONNECTING THE ANTENNA OR CABLE To obtain the best possible picture, use a quality antenna system. Inspect your antenna system for loose connections, broken wires, cracked insulation or other potential problems. These conditions can cause poor reception. AUTOMATIC POWER SHUT-OFF The TV will switch off automatically after 10 minutes if a signal is not being received. (This feature is not active while the AV mode is selected.
OM BE4P-E (FC8-A) CH3 CH4 OUT 1/4/10 OUTPUT Page 11 IN A/V JACKS INPUT 8:50 AM CH3 CH4 IN OUT MONITOR OUT INPUT AV1/DVD CR R R (MONO) CB L Y VIDEO L V I D E O 11
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 12 PLUG IN THE POWER CORD Plug the power cord into a convenient wall outlet that has standard house power of 230 volts ac, 50/60 Hz. CAUTION: To prevent electric shock, insert the AC PLUG fully into the outlet. Note: As a safety precaution, unplug or turn off the TV with the MAIN POWER switch on the TV front panel when you plan to be away for an extended period of time. AC PLUG TURN ON THE TV Press the POWER key.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 13 ON-SCREEN MENU SYSTEM The On-Screen Menu System allows the viewer to program television features to their personal preference. Adjustments can be made by using the keys either on the TV front panel (see pages 6 and 7) or on the remote control (see pages 8 and 9). Read this page for information on selecting menus.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 14 CHANNEL SETUP MENU Your TV can receive 181 channels: Off-Air VHF 2-13 and UHF 14-69 or Cable 1-125. The available channels are stored in the channel scanning memory in this TV. Make sure that your antenna is connected to the TV before setting the Antenna Mode or resetting the Channel Search. SETTING THE ANTENNA MODE 1 Press MENU. The Main Menu will appear. (See page 13.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 15 SKIPPING CHANNELS When there is a channel you do not use, Channel 4 for example, by setting the SKIP Channel function it is possible to jump over this channel, when you are selecting a channel using the CHANNEL ▲ (up) or ▼ (down) key. VHF/UHF START 02 OFF -- Select CHANNEL that you want to SKIP ➧ For example, to set channel “4” as Skip channel ; ANTENNA SEARCH CHANNEL SKIP MEMORY 1 Press MENU. The Main Menu will appear. (See page 13.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 16 PICTURE ADJUSTMENT MENU This feature is used to adjust the color, brightness, contrast, tint, sharpness and white tone to your personal preferences. PICTURE ADJUSTMENTS 1 Press MENU. The Main Menu will appear. (See page 13.) 2 Press the CHANNEL ▲ (up) or ▼ PICTURE AUDIO PRESET (down) key to select PICTURE. 3 Press VOLUME + or – key. The Manual Adjustment menu will appear.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 17 AUDIO ADJUSTMENT MENU This feature uses the on-screen menu system to adjust the audio controls: Bass, Treble, Balance, Bass Expander on or off, Surround on or off and Stereo stereo or mono (this feature available in AV mode only). AUDIO ADJUSTMENTS 1 Press MENU. The Main Menu will appear. (See page 13.) PICTURE AUDIO PRESET 2 Press the CHANNEL ▲ (up) or ▼ (down) key to select AUDIO. 3 Press VOLUME + or – key. The Audio Adjustment menu will appear.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 18 SELECTING THE PICTURE MODE ● Press the IMAGE key on the remote control to select the picture mode: PERSONAL, DYNAMIC, NATURAL, ECO or GAME. Use the chart below as a guide when you select the picture mode. ● Press the IMAGE key once to check the picture mode.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 19 TIMER SETTING OFF TIMER SETTING The OFF Timer will switch off the TV automatically. Use your remote control to set the Off Timer. 1 Press the SLEEP key until the desired time delay appears. 2 Press the VOLUME + or - key to select the time period. OFF : 0:00 0FF : 0:30 0FF : 1:00 CANCELLING THE SLEEP TIMER ● Press the SLEEP key, then select OFF:0:00 by pressing VOLUME + or - key.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 20 ON TIMER SETTING When the ON TIMER is set. TV will automatically be switched on to the selected Channel number when the specified time has elapsed. 1 Press the SLEEP key twice. 2 Press the VOLUME + or - key to select the time period. The set time will be increased or decreased by 10 minutes each time when the VOLUME + or - key is pressed ; the maximum time which can be set is 24 hours. Channel number for when TV is switched on by ON TIMER.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 21 SETTING OF THE PRIVATE POSITION Private position is used to restrict of channel positions that you do not want others to watch. Any position can be set as the Private position. HOW TO SET PRIVATE POSITION 1 Select channel “15”. Press and hold DISPLAY key ➧ For example, to set the channel “15” as the private position. 15 2 Press and hold the DISPLAY key for more than 2 seconds. 3 Press MENU key.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 22 CANCELLING THE PRIVATE POSITION 15 1 Select private position (In this case channel “15”). more than 2 seconds. ➧ Press and hold DISPLAY key 2 Press and hold the DISPLAY key for 3 Press the MENU key once again for watching a TV programme. The private position is now cancelled. 15 ➧ Press MENU key to watch it 15 CHECKING THE CHANNEL NUMBER, OFF-TIMER OR ON-TIMER To check the channel number, time or sleep timer, press the DISPLAY key on the remote control.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 23 SELECTING THE COLOUR SYSTEM IN AV MODE Depending on the type of video tape or connected AV equipment being used, it may be necessary to select colour system. In this case, press the DISPLAY key and select a suitable colour system. Each time the DISPLAY key is pressed, colour system is changed as follow; AV1 A U TO PA L NTSC NTSC4.43 RESETTING THE TV This feature automatically resets the television to factory settings.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 24 USING THE AUDIO/VIDEO INPUT JACKS You can connect your VCR, camcorder, video game, stereo system, etc. directly to the TV using the Audio and Video jacks. Be sure to switch off TV and external equipment before connecting cables. Make sure all cable connectors are fully seated on the jacks to avoid possible signal loss and audio hum. (Cables are not supplied.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 25 USING THE DVD INPUT JACKS CONNECTING TO a DVD PLAYER WITH AV1(DVD) VIDEO COMPONENT INPUT TERMINAL (Y, Cb or Cr) Connect the component output terminal on your DVD player to the component video input terminal of this product. (NOTE: When a signal of Y,Cb,Cr/Y,Pb,Pr is received, the output signal from monitor output terminal will be corresponding but without colour (black and white image).
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 26 USING THE AUDIO/VIDEO OUTPUT JACKS The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these terminals to record TV broadcasts and for video dubbing from AV input terminals. CONNECTING ANOTHER VCR • Connect the video output from TV to another VCR’s video input jack (refer to the VCR owner’s manual). • Connect the audio output from TV to another VCR’s audio input jack.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 27 HELPFUL HINTS - Problems/Solutions BEFORE REQUESTING SERVICE CHECK THE FOLLOWING CHART. Problem: TV turns off automatically. No picture or poor picture Poor color or no color Check these Conditions: Try these solutions: TV will automatically switch off. (See pages 10, 19 and 20.) ● Power surge protection feature. ● ● Press POWER key. Turn off the TV with the MAIN POWER switch momentarily. ● ● ● ● Check antenna connections. May be station trouble.
OM BE4P-E (FC8-A) 1/4/10 8:50 AM Page 28 Authorized SANYO Service Centers AUTHORIZED SERVICE CENTERS TEL NO. FAX NO. (632) 892-1493 (632) 892-1260 SANYO Service Center Basement, Solid House Building 2285 Don Chino Roces, Avenue, Ext. Makati City Quezon City Branch 137-A Roosevelt Ave., SFDM, Quezon City (02) 374-1349 (02) 414-9647 Dagupan Branch No.3 Pinkies Bldg., Zamora cor. Gomez St.