Owner's Manual

36
MENU OPTION— CHANNEL SCAN MEMORY
Cannot select or scan some
channels.
 Channels may be removed from
memory.
 Check antenna connections.
 NO digital signal being broadcast.
 Weak Signal.
 V-Guide is set to block program-
ming.
 Select Channel Scan memory and
manually add channels or start an
“All Channel Search.”
 Turn antenna, install signal
booster.
 Set V-Guide to “Off” or press
RESET key to clear all settings and
restart channel search.
HELP HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
3
Use the CHANNEL (CH ) keys or numerical
0 ~ 9 keys to select desired channel.
4
Press the ENTER key to add the channel. The
display will change to “added.”
1
Press the MENU key to display the Main menu.
2
Use the CURSOR  keys to highlight Channel
Scan Memory. Press ENTER.
ADDING DIGITAL OR ANALOG
CHANNELS TO MEMORY
Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH 
(up) CH  (down) keys. This list can be customized by
deleting and/or adding channels.
After 3 seconds the TV screen will display
“Delete?”
OPERATING TIP:
 If one digital sub-channel is added back to the
Channel Scan Memory list, all of that channel’s
sub-channels will be added back.