INST.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:27 PM Page 2 War nings and Cautions Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:27 PM Page 3 Plug & Play Contents Warnings and Cautions . . . . . . . . . . . . . . 2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3 Plug & Play . . . . . . . . . . . . . . . . . . . . . . . 3 Front Control . . . . . . . . . . . . . . . . . . . . . 4-5 Remote Control Transmitter . . . . . . . . . . 6 Battery Installation of the Remote Control Transmitter . . . . . . . 6 General Operation Remote Control Operation . . . . . . . . . 7 OFF TIMER . . . . .
INST. MANUAL -C8WE-D (AUS) 3:27 PM Page 4 Each button listed in this section has the same function as it’s corresponding button on the remote control.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 5 Each button listed in this section has the same function as it’s corresponding button on the remote control.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 6 Remote Contr ol Transmitter TIMER button TV / AV Power ON/OFF button TV / AV Selector button TIMER MUTE button RECALL/COLOUR SYSTEM button Programme Selector button P -/- - P DIGIT button SWAP CH SCAN CH CHANNEL SCAN button SWAP button VOLUME - button VOLUME + button MENU STEREO/MONO button (This button is not used) Programme DOWN button PICTURE MODE button A •B BASS CH SOUND PICTURE S.
-/- - INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 7 General Operation Remote Control Operation Standby/Power-on To switch the TV on and off. For shutting off a power supply completely, Press the Mains ON/OFF button on the front control of TV set.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 8 General Operation /Colour and Sound System OFF TIMER The OFF TIMER will switch off the TV automatically after 30 minutes, 1 hour, 1 hour and 30 minutes, or 2 hours. 1 2 Press the TIMER button. OFF 0:00 Press the VOLUME ( + or - ) button to select the time period. ■ Just one minute before switching off the TV, “OFF 0:01” will be display on the screen. ■ To cancel the OFF TIMER, select “OFF 0:00” by pressing the VOLUME (+ or - ) button.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 9 Colour and Sound System / Pictur e Adjustment or: 1) Select “SIF” with the Programme UP or DOWN button in the Semi-auto or Manual Tuning mode. Then press the VOLUME (+ or -) button to select a optimum sound system. (Semi-Auto or Manual Tuning mode ) MODE SEARCH POSITION SYSTEM SIF SKIP MEMORY ADJUST BACK EXIT BG I DK M (5.5MHz) (6.0MHz) (6.5MHz) (4.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 10 Pictur e Adjustment / Audio Adjustment Basic Picture Adjustment Operation 1 Press the MENU button for MAIN menu display. (MAIN MENU) PICTURE AUDIO PRESET LANGUAGE SELECT Audio Adjustment Menu is not equipped in monaural models. ENTER EXIT 2 ■ To return to Main menu, press the ALTERNATE button. ■ To return to the normal TV mode, press the MENU button. ( Or will automatically return to the normal TV mode after 20 seconds.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 11 Tuning of the Channels Up to 256 broadcast stations in your reception area can be stored in the electronic memory. There are three ways of tuning as follows; 1. Automatic Tuning (the basic way): All receivable channels are automatically tuned in and memorized in consecutive programme position. 2. Semi-Auto Tuning: Use to preset a receivable channel in any desired programme position, e.g. the position with the same number as the channel. 3.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 12 Tuning of the Channels Channel Copy This function can be utilized after Automatic Tuning. 3 For example, to copy a TV channel on programme position “2” onto programme position “6”; 1 Press the DIGIT button, “ 1 “ button and then “ 2 ” button on the remote control to enter programme number 12. (For example, to enter programme number “ 3 “, press “ 3 ” button only. ) SWAP 6 AND 12 Select programme position “2” .
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 13 Tuning of the Channels / Setting of the Private Position 4 Select “SKIP” by pressing the Programme UP or DOWN button,then press the VOLUME + or - button to set SKIP to ON. To cancel Skip Channel function, set to OFF. MODE SEARCH POSITION SYSTEM SIF SKIP MEMORY ADJUST BACK EXIT Select “MEMORY” by pressing the Programme UP or DOWN button, then press the VOLUME + or - button for memory.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 14 Setting of the OSD Language / Connecting Other Equipment 1 Press the MENU button for MAIN menu display. ENGLISH VIETNAMESE PyCC NN FRANCAIS BAHASA INDONESIA PICTURE AUDIO PRESET LANGUAGE 2 Select “ENGLISH”, “ ”, “VIETNAMESE”, “ PyCC N N ”, “FRANÇAIS”, “BAHASA INDONESIA” by pressing the Progamme UP or DOWN button. Select “LANGUAGE “ by pressing the programme UP or DOWN button.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 15 Connecting Other Equipment ■ When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1. Whenever the TV/AV button is pressed, the mode will change as follows: AV1(DVD) AV1 28 TV mode AV2 (This AV1(DVD) will be displayed for model with DVD Component input.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 16 Connecting Other Equipment Note: For monaural model TV there is no L/R audio input terminals. If the video player is stereo, connect the Left (L) audio output terminal from video player to audio input terminal on the monaural TV set (more details see your video player manual book).
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 17 Aerial Connection / Care and Cleaning Aerial Connection Connecting Outdoor Aerial Connect the cable with a plug from a UHF (or VHF) aerial to the aerial socket on the cabinet back. Outdoor Aerial Aerial Cable Aerial Socket For all aerial circuit problems please consult your local dealer. Care Care and Cleaning The surface of the cabinet can be damaged if not properly maintained.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 18 Specifications Power Source AC127-240 Volts, 50/60Hz Colour System PAL/SECAM/NTSC4.
INST. MANUAL -C8WE-D (AUS) 4/10/08 3:28 PM Page 19 Helpful Hints - Pr oblems/Solutions Before requesting service check the following chart. Problem: Check these Conditions / Try these solutions: No picture, no sound ● Check if TV is plugged in. ● Try a different channel, if OK, probably station trouble. Poor picture, sound OK ● Adjust Brightness or Contrast control. ● Adjust Fine Tuning. (See page 9.) ● Check aerial connection. No colour, Picture OK ● Adjust Colour or Tint control.
INST. MANUAL -C8WE-D (AUS) 4/10/08 Part No. 1AA6P1P5434-D C8WE-D (AC7-A) 3:28 PM Page 20 SANYO ELECTRIC Co., Ltd.