Operation Manual

English - 16 -
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC.
• Press STANDBY button. Then the standby
LED lights up.
• To switch on the TV from standby mode either:
• Press the button, P+ / P- or a numeric
button on the remote control.
• Press the -P/CH or P/CH+ button on the TV.
The TV will then switch on.
Note: If you switch on your TV via PROGRAM
UP/DOWN buttons on the remote control
or on the TV set, the programme that
you were watching last will be reselected.
To Switch the TV Off
• Press the button on the remote control or
STANDBY button on the TV, so the TV will
switch to standby mode.
• To power down the TV completely, unplug
the power cord from the mains socket.
Navigating the Menu System
M
INFO
OK
SELECT
For displaying
menu options
For navigation
To confirm
choices
• Press M to display the main menu.
• Press
or button to select an icon. Press
or OK button for more options.
• Use
or button to highlight.
• Press
or buttons to change the settings.
Press OK to set as default.
• To exit the menu or return from sub-menu
screen, press M.
Note: These explanations are valid for the
navigation of the whole menu system.
To select options that are explained in
the following parts, refer to “Navigating
the Menu System”.
Initial Settings
When the TV set is operated for the first time,
the IDTV turns on first.
Because this is the first time the TV is used, there
are no channels stored in the memory and the
following message appears on the screen:
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes No
• To start installation process, select “Yes”,
to cancel select “No”.
• To select the “Yes” or “No” option, highlight
the item by using
or buttons and press
the OK button.
The IDTV will automatically tune to the UHF
transmision channels 21 to 68, searching for
digital terrestrial TV broadcasts and displaying
the names of channels found. This process
will take about five minutes. To cancel
searching, you can press the M button at any
time during the process.
MENU
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
Cancel search
AUTOMATIC SEARCH
Channels:
12 %
After Automatic Search is completed, the
following message asking for analogue channel
search appears on the screen:
ENG-47751W-MB26 UK IDTV-1050UK-(WSUB-ALO-2SCRT)(3D PANORAMA)(ECO PIP)(C2)-50110360.p6506.07.2007, 22:1816