Operation Manual

54
To connect the LCD TV/DVD to a VCR with an S-Video cord
If you connect a VCR with a S-VIDEO cable to the S-VIDEO IN jack on the rear lower right of the unit, you must
also connect the audio cables to the AUDIO IN jacks on the rear lower right of the unit.
The S-VIDEO cable only carries the video signal. The audio signal is separate.
NOTE:
When the S-video cable and the standard video cable are connected at the same time, the S-video cable takes
precedence.
The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for
the location of video and audio inputs and outputs.
Connections to other equipment
To connect to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD
player with the COMPONENT video cables (not supplied).
NOTE:
Component Video input of this unit are for use of device which output 480i/1080i interlaced signals and 480p/
720p progressive signals.
VCR
Rear lower right of unit
Audio cord (not supplied)
S-Video cord (not supplied)
To Audio OUT
AUDIO IN (R)
AUDIO IN (L)
S-Video IN
VCR
Rear lower right of unit
Video cord (not supplied)
Audio cord (not supplied)
To Component
Video output
To Audio out
COMPONENT (P
R, PB, Y) IN
COMPONENT
AUDIO (L/R) IN
To connect the LCD TV/DVD to a VCR
VCR
Rear lower right of the unit
Audio/Video cord (not supplied)
To Audio/Video OUT
VIDEO IN
AUDIO IN (R)
AUDIO IN (L)
5V10101A[EN] P49-55 9/30/05, 15:1154