Operation Manual

15
TV operation
If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
If a station being viewed stops
broadcasting, the unit will automati-
cally shut itself off after 15 minutes.
To turn on the unit, press POWER.
Set the TV/CABLE menu
option to the appropriate
position (see page 17).
Adjust the volume level by pressing
VOL + or – . The volume level will
be indicated on the screen by white
bars. As the volume level increases,
so do the number of bars. If the
volume decreases, the number of
white bars also decreases.
1
2
3
4
Press the Direct Channel Selection
buttons to select the channel.
TV Mode Direct Channel Selection
When the TV/CABLE menu option is in
the TV position, all channels can be
instantly selected by using two buttons.
(for example, to select channel 2, press 0, then 2. If you press only
2, channel selection will be delayed for a few seconds.) For
channels 10 and above, press the 2 digits in order.
CABLE Mode Direct Channel Selection
When the TV/CABLE menu option is in the CABLE position, channels
can be selected as follows:
TO SELECT Cable TV CHANNELS:
1-9: Press 0 twice, then 1-9 as needed. Example, to select
channel 2, press 002.
10-12: Press 0, then the remaining 2 digits. Example, to
select channel 12, press 012.
13-99: Press the 2 digits in order. Example, to select channel
36, press 36.
100-125: Press the 3 digits in order. Example, to select channel
120, press 120.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds.
VHF/UHF/CABLE CHANNELS
NOTES:
•
•
TV - VHF/UHF channels
CABLE - CABLE TV channels
VOLUME 32
TV CABLE
VHF
2-13
UHF
14-69
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
ANT
ABCD
012
5V10101A[EN] P13-18 9/30/05, 15:0915