Operation Manual

31
Setting the picture size
NATURAL picture size
In many cases, this image will display the size of standard 4:3
with a black side bar.
2
NOTE:
You can also display the PICTURE SIZE menu by pressing the
PICTURE SIZE button on the remote control.
1
Press MENU. Press or to
select SETUP menu.
Press ▲ or ▼ to select “PIC-
TURE SIZE”.
Selecting the picture size
Press or . The PICTURE
SIZE menu will appear. Press ▲
/ ▼ or a number buttons (0-4)
to select the desired picture size,
as described below and on the
next page, then press ENTER.
You can view 480i and 480p
format programs in a variety of
picture sizes—NATURAL, CINEMA
WIDE1, CINEMA WIDE2, CINEMA
WIDE3, and FULL.
Natural picture size
example
CINEMA WIDE1 picture size (for 4:3 format programs)
To fill the screen, the right and left
edges are extended more widely
though the center of the picture
remains near former ratio.
The top and bottom edges of the
picture may be hidden.
PICTURE SIZE
0 : NATURAL
1 : CINEMA WIDE1
2 : CINEMA WIDE2
3 : CINEMA WIDE3
4 : FULL
SELECT : [0-4]
SET : ENTER
SETUP
CLOSED CAPTION OFF
CC ADVANCED
PICTURE SIZE
PICTURE SCROLL
: SELECT : ADJUST
CINEMA WIDE1 picture
size example
3
Press EXIT to return to the normal screen.
3R90101C_En_p25-32 4/25/05, 7:34 PM31