Operation Manual

17
NOTES:
• If a channel with no broadcast is
selected, the sound will automatically
be muted.
• If a station being viewed stops
broadcasting, the TV will automatically
shut itself off after 15 minutes.
• It may take a few seconds for a
digital channel picture to appear on
screen after being selected.
1
2
3
4
To turn on the TV, press POWER.
Adjust the volume level by pressing
VOL +
or – . The volume level will be
indicated on the screen by green bars.
As the volume level increases, so
do the number of bars. If the volume
decreases, the number of green bars
also decreases.
Set the TV/CABLE menu option to
the appropriate position (see page
14).
Press the Direct Channel Selection
buttons to select the channel.
To select analog channels
1-9: Press 0 twice, then 1-9 as
needed. Example, to select
channel 2, press 002.
10-99: Press 0, then the remaining
2 digits. Example, to select channel 12, press 01 2.
100-125: Press the 3 digits in order. Example, to select channel
120, press 120
.
To select digital channels
Press the first 3 digits, then press the “–/DISPLAY” button, followed
by the remaining 3 digits.
Example, to select channel 015-001, press 015 – 00 1.
• If a channel is selected with only audio content, “AUDIO ONLY”
will be displayed on the screen.
• If a channel is selected with a weak digital signal, “DIGITAL
CHANNEL SIGNAL STRENGTH IS LOW” will be displayed on
the screen.
• If a channel is selected to which you have not subscribed,
“DIGITAL CHANNEL IS SCRAMBLED” will be displayed on the
screen.
VHF/UHF/CABLE CHANNELS
VOLUME 32
TV operation
A N T
A B C D
1 2
TV
- VHF/UHF channels
CABLE
- CABLE TV channels
TV
CABLE
VHF
2-13
UHF
14-69
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)