Technical Specifications
SFA US1 – 0110
SANIFLUSH
ROUND TOILET BOWL
Close-Couple Toilet – 1.6 GPF (6 Litre Flush)
SANIFLUSH 003 & 005
003 Round Bowl
o Vitreous China
o Integral P-trap and a spigot rear outlet
o Seating Height: 16-3/4”
o Large 3” trapway
o Wash down style toilet
o Low flush toilet; it uses 1.6 gallons (6 L)
per flush
o Toilet supplied with a set of lag screws,
plastic anchors and china protectors
o Water spot measures 6 x 5 inches
o 1 Year Warranty
005 Tank
o Vitreous China
o Insulated tank to prevent condensation
o The zero re-fill fill valve is easily
adjustable
o The flush valve has a silicone flapper seal
o Water level mark applied to the overflow
tube
o Toilet tank supplied with bowl screws,
washers and wing nuts.
o 1 Year Warranty
o Warranty for fill and flush valve as per
manufacturer.
Nominal Dimensions:
32” x 17-3/4” x 26-1/2”
(813mm x 451mm x 673mm)
Fixture Dimensions and Hydraulic
Performance – Meets or Exceeds the
Following Specifications
• ANSI/ASME A112.19.2M and CAN/CSA
B45 Requirements
• IAPMO/UPC Certificate of Listing
Notes
• Available in white only
• Toilet Seat Recommended – Church model
300SLOW or equal. (not supplied)
• Replacement Fill Valve Recommended -
Fluidmaster 400A or equal. (not supplied)
Round Bowl with Tank (003 & 005)
Care & Cleaning
• When cleaning toilet, wash it with mild
soapy water or liquid cleaners that are not
chlorine or bleach based. Avoid using
detergents.
• We do not recommend the use of in-tank
cleansers. Products containing chlorine
can cause damage to the fittings inside the
tank and cause them to fail prematurely.