Operation Manual

Battery operation using alkaline batteries

1. Remove the battery cover on the rear of the unit by sliding the catch.

2. Insert six C size (UM2, LR 14) alkaline batteries into the spaces in the compartment. Ensure

all batteries are inserted with the correct polarity as shown inside the battery compartment.

3. Slide the battery switch to the Alkaline position and then replace the battery cover.

● Important: when using alkaline batteries, the battery switch must be placed in the alkaline

position. Failure to do so could result in serious damage to the batteries or radio.

● Reduced power, distortion and a “stuttering“ sound are all the signs that the batteries may

need replacing.

● If the radio is not to be used for any extended period of time, it is recommended that the

batteries are removed from the radio.

● We would recommend for economy that the radio is used via the AC adaptor whenever possible

with battery operation for occasional or standby use only. If extended listening using batteries

is anticipated, then the use of rechargeable batteries is recommended.