Instructions / Assembly
ENGLISH
INSTALLATION INSTRUCTIONS
The user is responsible for the proper installation and use
of this dispenser. NOTE: Hardware may not be included
with your product. If hardware is factory supplied, refer to
mounting instructions located in hardware pack.
Equipment needed:
wall mounting hardware.
(screws, bolts, anchors, washers, etc.)
for mounting.
open. Through the holes at the back of the
unit, use pencil to mark the spots where the
drilling will be necessary. Try to mark spots
as close as possible to the outer edges.
with drill bit.
3. Complete the installation. Be sure to use
fasteners (and anchors) in all mounting holes
which the dispenser will be mounted. Use
hardware included with the unit if it was
factory supplied. The installation should be
done with a at washer between the head
of the fastener and the inside back of the
dispenser.
FRANÇAIS
et utilisation du distributeur de papier. Au cas où le matériel fait
Outillage exigé:
boulons, rondelles)
les marquages en crayon le plus proche
du distributeur.
utilisant une mèche.
et recommandés an de xer le distributeur de
papier au mur de façon appropriée ainsi que de
garantir un fonctionnement optimal. Il est
également recommandé de toujours placer
ESPAÑOL
El usuario es responsable por la instalación y uso adecuado
las instrucciones contenidas en el paquete.
Equipo necesario:
montar sobre la pared.
etc...apropiados para el montaje.
marcar en la pared los puntos donde será
necesario taladrar (lo mas cerca posible a
los bordes del dispensador).
marcados con la barrena.
tornillos, anclas, etc. Apropiados para la
jación en donde el dispensador será
proporcionadas por la fábrica e incluidas en
la unidad. La instalación debe hacerse con
y el interior del fondo del dispensador.
N37ARevJ.indd 1 11/2/12 9:07 AM