User Manual

19
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
◆ Colour tone, Contrast, Brightness, Sharpness, Colour,
Tint (NTSC only)
1 Press the MENU button.
Result:
The “Picture” menu is displayed.
2 Press the + or – button.
3 Press the ▲ or ▼ button to select the “Adjust”, and then press the +
or – button.
Result:
The “Adjust” menu is displayed.
➣
When select the “Mode” to “Custom”, the “Adjust” menu is
displayed.
4 To adjust the... Press the...
◆ Colour tone ◆ + or – button.
Result: You select the required option
(Normal, Warm1/2, Cool1/2).
◆ Contrast ◆ + or – button.
◆ Brightness Result:
The horizontal bar is displayed.
◆ Sharpness
◆ Colour
◆ Tint (NTSC only)
5 When you are satisfied with the settings, press the TV button or,
press the MENU button repeatedly to return to normal viewing.
➣
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing To Remove Colour Patches” on page 37.).
➣
Changes made to these settings while the Custom mode is
selected are memorised, and are recalled when you switch
the television back on.
Select Enter Exit
Picture
Mode Custom
Adjust
Digital NR : Off
Tilt : 0
Select Adjust Exit
Adjust
Colour tone : Normal
Contrast : 90
Brightness : 50
Sharpness : 50
Colour : 50
Contrast 91
Select Adjust Exit
Adjust
Colour tone : Normal
Contrast : 90
Brightness : 50
Sharpness : 50
Colour : 50
Colour tone : Warm1
You can select the picture format which best corresponds to your
viewing requirements by simply pressing the “” button.
The following picture formats are available:
◆ Auto wide, Panorama, 16:9, 4:3 (Normal), Zoom1, Zoom2
◆ Normal, Zoom, 16:9
Selecting the Picture Format (depending on the model)