Washer User's Manual

50_ washing a load of laundry
STEP 10
After the phone is connected
to the machine, press
the Temp & Start/Pause
buttons simultaneously for
3 seconds. After 3 seconds
the original wash cycle will
be displayed on the LED
screen.
STEP 11
After the wash cycle
has been displayed wait
approximately 1 minute. You
will then see the Wi-Fi icon
start to blink.
STEP 12
Once the Wi-Fi icon is
displayed press and hold the
“Signal” for 3 seconds. The
Wi-Fi icon will stop blinking.
The machine is now ready to
run the device certifi cation.
Device certification
1. The “Device Certifi cation” only needs to be
run with the initial setup. Touch the “Indoor
Control” tab to search for the washer’s name.
Once the washer ‘s name is displayed touch
tab.
Figure 1 Figure 2
washing a load of laundry
WF455AG-03159A-03_EN.indd Sec5:50WF455AG-03159A-03_EN.indd Sec5:50 2012-08-31  12:32:012012-08-31  12:32:01