Washer User Manual

20_ setting up your washing machine

setting up your washing

machine

Connecting the drain hose

The end of the drain hose can be positioned in three ways:

1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60

and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure

the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose

from moving.

2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that

the end of the hose is at least 60 cm above the ground.

3. ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than

60 cm and no longer than 90 cm.

The standpipe drain requires;

• minimumdiameter5cm.

• minimumcarry-awaycapacity60literperminute.

STEP 5

Poweringyourwashingmachine

Plug the power cord into a wall sockets, an AC 220-240V / 50Hz approved electrical outlet

protected by a fuse or circuit breaker. (For more information on electrical and grounding

requirements, see page 14.)

Drainhose

Hoseguide

60 ~ 90 cm

WF0704W7-02875A_EN.indd 20 2011-2-21 15:37:24