Керівництво користувача

1. Slide the free end of the extension wand into the nozzle

tube.

2. Slide the narrow end of one extension wand into the other

extension wand.

3. Slide the extension wand into the handle end of the hose.

4. Slide the hose clamp into the suction inlet of the unit.

* Option •Assemble the CYCLONIC FILTER with the handle

and extension wand(depending on model). •Ajusting the

telescopic tubes(depending on model).

EXTENDING : Holding narrow

side of the telescopic tube with a

hand, pull the hadle to the oppo-

site side of it with another hand.

SHORTENING : Push the handle

to the narrow side of the tube,

hoding it with another hand.

*OPTION

1) PULLING OUT

The power cord is long enough to be drawn out for conve-

nience.

2) REWINDING

When you have finished cleaning, disconnect the plug from the

electrical outlet and simply press the cord rewind button ligtly

with your toe.

NOTE: When removing the power cord from the electrical outlet,

grasp the plug, not the cord.

NOTE: For your convenience, the handle has two functions. It can

be used as a “handle” to carry the carry the unit, It is also

the cord rewind button that can be used to rewind the

power cord.

POWER CORD

ASSEMBLING THE VACUUM-CLEANER FOR USE

VC8615-EN 6/23/01 10:57 AM Page 6