Kullanıcı Klavuzu

EN-6

REPLACING THE DUST BAG

1) To open the dust cover of the dust bag com-

partment, press the clamper upwards.(The

clamper is located at the front of the dust cover)

2) Remove the dust bag from the cleaner.

FOR CLOTH FILTER BAG

MAINTENANCE OR REPLACEMENT OF THE FILTERS

INLET FILTER

To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust

compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage may

result. After cleaning the secondary filter attach it in place.

After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.

▲

SECONDARY FILTER SECONDARY FILTER

OUTLET FILTER

▼

NOTE: The filters must be completely dried before being replaced in the dust compartment.

1) Open the grille part, separate the

exhausted filter.

2) Reassemble it after cleaning or replacing

the filter in the reverse order.

3) After removing the used dust bag, insert the

cardboard bag collar of the new dust bag into

its original position.

4) Press the dust cover down gently until the

clamper relocks.

DJ68-00159A-TR+EN(0.2) 4/7/04 11:20 AM Page 14