מדריך למשתמש

FOR CLOTH FILTER BAG

NOTE: The filters must be completely dried before being replaced in the dust

compartment.

After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.

1) To open the dust cover of the dust

bag compartment, press the clamper

upwards.(The clamper is located at

the front of the dust cover)

2) Remove the dust bag from the

cleaner.

INLET FILTER

To protect the motor, your cleaner features a secondary filter at the front of the motor in

the dust compartment. Do not allow the filter to become clogged. Suction power reduc-

tion or motor damage may result. After cleaning the secondary filter attach it in place.

After removing the used dust bag,

insert the cardboard bag collar of the

new dust bag into its original position.

4) Press the dust cover down gently

until the clamper relocks.

MAINTENANCE OR REPLACEMENT OF THE FILTERS

▼

OUTLET FILTER

1) Open the grille part, separate the

exhausted filter.

2) Reassemble it after cleaning or

replacing the filter in the reverse order.

▼

SECONDARY FILTER

REPLACING THE DUST BAG

DJ68-00094J (1.0) 10/16/06 9:25 AM Page 7