Operation Manual

38
Controlling External Devices with the TV Remote -
Using the Universal Remote
(MENU/123) MENU System Universal remote setup
Try Now
You can control external devices connected to the TV using the TV's remote control.
"
This function is supported for the S9 and 6500, 6600, 6700, 7000, 7500, 8000 and 8500 series models in
specific geographical areas. However, in the CIS region, this function is not supported for the 6500 series.
"
You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's
remote control without any additional setup. Refer to "Using Anynet+ (HDMI-CEC)" for more information.
"
Certain external devices connected to the TV may not support the universal remote feature.
Setting up the universal remote control
1.
Connect the external device to control with the universal remote control to the HDMI port on the
TV, and then turn on the external device.
2.
Press the SOURCE button on your remote control to bring up the Source screen.
3.
Select the Universal remote setup.
4.
Follow the directions on the screen to complete the set up and register the device. The directions
will be different, depending on the device you want to control.
"
If the external device does not respond after being registered, register it again using its model number.
"
The TV memorises both the external device and the connection (HDMI 1, HDMI 2, etc.) the device is
connected to.