Operation Manual

26
When Aerial Source is set to Air or Cable
●
Digital Channel Tuning
Scans for a digital channel.
1.
Select the New.
"
When selecting Aerial → Air: Channel, Frequency, Bandwidth
"
When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate
2.
Select the Search. When scanning has finished, a channel is updated in the channel list.
●
Analogue Channel Tuning
Scans for an analogue channel.
1.
Select the New.
2.
Set the Programme, Colour System, Sound System, Channel and Search.
3.
Select the Store. When scanning has finished, a channel is updated in the channel list.
Channel mode
●
P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
●
C (aerial channel mode) / S (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
Transfer Channel List
Screen Menu
>
Broadcasting
>
Channel Settings
>
Transfer Channel List
Try Now
Imports or exports the channel map.
"
You should connect USB storage to use this function.
"
The PIN input screen appears. Enter the PIN using your remote.
●
Import from USB: Import channel list from USB.
Try Now
●
Export to USB: Export channel list to USB. This function is available when USB is connected.
Try
Now
Delete CAM Operator Profile
Screen Menu
>
Broadcasting
>
Channel Settings
>
Delete CAM Operator Profile
Try Now
Select the CAM operator to delete.