Operation Manual

◀ ▶
Issues Solutions and Explanations
You see small particles
when you look closely at
the edge of the frame of
the TV.
●
This is part of the product’s design and is not a defect.
The PIP menu is not
available.
●
PIP functionality is only available when you are using a HDMI or
components source.
LCD 420 does not support AV, Component mode
You turned the TV off
45 minutes ago, and it
turned on again.
●
It is normal. The TV operates the OTA (Over The Aerial) function itself to
upgrade firmware downloaded whilst your watching TV.
The message
“Scrambled Signal” or
“Weak or No Signal”
appears.
●
If you are using a CAM CARD (CI/CI+), check that it is installed into the
common interface slot.
●
If there is still a problem, pull the CAM CARD out of the TV and insert it
into the slot again.
English