User Manual
Table Of Contents
- FEATURES
- SAFETY WARNINGS
- INSTALLING THE APPLIANCE
- PREPARING THE APPLIANCE
- FRONT CONTROL PANEL
- CONTROLLING THE FREEZER AND REFRIGERATOR TEMPERATURES
- ICE / COLD WATER DISPENSER (MODEL WITH ICE AND WATER DISPENSER ONLY)
- STORING FOOD
- VIEW OF YOUR FRIDGE/FREEZER
- REMOVING THE FREEZER ACCESSORIES
- REMOVING THE REFRIGERATOR ACCESSORIES
- EXTRA REFRIGERATING COMPARTMENT (MODEL WITH HOME BAR)
- CLEANING THE ACCESSORIES
- CHANGING THE INTERIOR LIGHT
- ICE-MAKING FILTER
- PROBLEMS AND SOLUTIONS
4
INSTALLING THE APPLIANCE
1 2
3
1 cm
1 cm
1 cm
Clean your fridge/freezer.
•
Wipe the inside and outside of
your fridge/freezer with a dry
cloth.
Store food in the refrigerator.
•
Wait for at least two or three hours after plugging
your appliance in before storing food and other
items in it.
1 2
Allow a clearance of 1 cm to the right, left and back when installing the appliance; this has the advantage
of reducing power consumption.
LEVELLING
When you adjust the level of the fridge/freezer, set the front legs slightly higher than the rear legs, so
that you can open and close the door more easily.
First disassemble the leg cover and then adjust the level of the fridge/freezer.
If your fridge/freezer tilts to the
left, turn the left adjusting
screw.
If your fridge/freezer tilts to the
right, turn the right adjusting
screw.
Allow sufficient space to install
the appliance on a flat surface.
•
If your appliance is not level, the
internal cooling system may not
work correctly.
SR-20/ENG(NEW) 3/30/59 9:53 AM Page 4