DA68-00500P 6/26/02 2:34 PM Page 1 ENGLISH USER MANUAL SR-S20... SRS579NP SRS580DTKG SRS582DSSB SRS615DP SR-S22... SRS580DW SRS581DTKM SRS582DTKGM SRS614DW SRS616DSSB SRS616DHSS FRIDGE/FREEZER Before operating the appliance, please read this manual thoroughly and retain it for future reference. DA68-00500P REV(0.
DA68-00500P 6/26/02 2:34 PM Page 2 FEATURES What is the H. M. Cycle (High-efficiency, Multi-evaporator Cycle)? • The refrigerator and freezer have separate evaporators. Given this independent system, the refrigerator and freezer are cooled individually as required and are, therefore, more efficient. Food odour from the refrigerator does not affect food in the freezer because the two are not connected.
DA68-00500P 6/26/02 2:34 PM Page 3 WARNING Do not use the fridge/freezer with a multi-plug adapter. • This causes a potential fire hazard. Make sure that the power plug is not squashed or damaged by the back of the fridge/freezer. • A damaged power plug may overheat and cause a fire. Do not remove the power cord by pulling on its lead. • Damage to the cord may cause a short-circuit, fire and/or electric shock.
DA68-00500P 6/26/02 2:34 PM Page 4 INSTALLING THE APPLIANCE Allow a clearance of 1 cm to the right, left and back when installing the appliance; this has the advantage of reducing power consumption. Allow sufficient space to install the appliance on a flat surface. • If your appliance is not level, the internal cooling system may not work correctly. Clean your fridge/freezer. • Wipe the inside and outside of your fridge/freezer with a dry cloth. Store food in the refrigerator.
DA68-00500P 6/26/02 2:34 PM Page 5 EARTHING THE APPLIANCE WARNING The appliance must be earthed. You must earth the fridge/freezer to prevent any power leakage or electric shock caused by current leakage from the appliance. • Never use gas pipes, telephone lines or other potential lightning rods as earths. You are using a power plug without earth. • Connect one end of the earthing wire (yellow/green or green) to the earthing screw and the other end to a steel or copper pipe, such as a water pipe.
DA68-00500P 6/26/02 2:34 PM Page 6 FRONT CONTROL PANEL Basic model Model with ice and water dispenser FREEZER TEMPERATURE BUTTON Sets the freezer temperature. Press the button repeatedly to change the temperature in sequence between -14°C and -26°C. REFRIGERATOR TEMPERATURE BUTTON Sets the refrigerator temperature. Press the button repeatedly to change the temperature in sequence between 7°C and -1°C. QUICK FREEZE BUTTON Speeds up the freezing process in the freezer.
DA68-00500P 6/26/02 2:34 PM Page 7 CONTROLLING THE FREEZER AND REFRIGERATOR TEMPERATURES Freezer Refrigerator • The freezer can be set to a temperature between • The refrigerator can be set to a temperature between 7°C and -1°C. -14°C and -26°C. • Press the FREEZER TEMP. button repeatedly until the required temperature is shown in the temperature display. • The temperature display changes in sequence between -14°C and -26°C. When the display reaches -26°C, it returns to -14°C.
DA68-00500P 6/26/02 2:34 PM Page 8 OTHER INDICATORS (MODEL WITH ICE AND WATER DISPENSER) Ice Cubes, Crushed Ice and Ice Off • Press the ICE MODE button to make ice cubes or crushed ice and also to stop making ice. • Press the button one or more • If you select “Ice off”, the ice • You can set the ice timer to • Press the ICE MODE button to times to change between ice cubes, crushed ice and ice off in sequence. The appropriate light comes on.
DA68-00500P 6/26/02 2:34 PM Page 9 MAKING ICE (BASIC MODEL) Add water until it reaches the water level indicator. Pull out the ice tray. Put the ice tray back in place. ICE / COLD WATER DISPENSER (MODEL WITH ICE AND WATER DISPENSER ONLY) The ice making device makes 10 cubes at a time and about 100 cubes a day automatically. This quantity may be influenced by such factors as the freezer temperature and the number of times that the door is opened.
DA68-00500P 6/26/02 2:34 PM Page 10 STORING FOOD REFRIGERATED FOOD STRORAGE METHODS Tempered glass shelf Dairy compartment • Can be used safely because • Can be used to store Fresh center (option) Multiple guard • Helps preserve the taste of • Can be used to store it will not break if it falls. fatty foods, like butter and cheese. food and prolongs its freshness. Use the chiller to store cheese, meat, snacks, fish or any food to be used quickly.
DA68-00500P 6/26/02 2:34 PM Page 11 Meat and dry goods storage compartment • Can be used to store meat and dry goods. Stored food should be wrapped securely using foil or other suitable wrapping materials. Door guard • Can be used for frozen foods. Ice chute and ice-maker cover • Do not put your fingers, hands or any foreign object in the chute and ice-maker cover.
DA68-00500P 6/26/02 2:34 PM Page 12 REFRIGERATOR Dairy compartment Lights Guard Extra Refrigerator Compartment (model with Home Bar) Fresh center (option) Shelf Egg rack Drawer cover Fresh salad drawer(upper) Fresh fruit salad drawer (lower) Bottle guard REMOVING THE FREEZER ACCESSORIES Tempered glass shelf Ice maker and tray • Remove the ice tray by pulling it towards you. Then remove the ice maker (basic model only). • Pull the shelf out as far as it goes. Then lift it up and remove it.
DA68-00500P 6/26/02 2:34 PM Page 13 REMOVING THE REFRIGERATOR ACCESSORIES Tempered glass shelf • Pull the shelf out as far as it will go. Then lift it up and remove it. Bottle and door guard • Hold the shelf in both hands and remove it by lifting it up. Fresh fruit salad drawer and cover • Remove the compartment by holding the handle, pulling the compartment towards you and lifting it up slightly. • Remove the cover by pulling it towards you.
DA68-00500P 6/26/02 2:34 PM Page 14 Ice and water dispenser and drainage grid (model with ice and water dispenser ) • Use a damp cloth to clean the ice and water dispenser. Then wipe it with a dry cloth. • Keep the ice and water dispenser and drainage grid dry. Extra refrigerating compartment (model with Home Bar) • Use a damp cloth to clean the extra refrigerating compartment. Then wipe it with a dry cloth.
DA68-00500P 6/26/02 2:34 PM Page 15 ICE-MAKING FILTER What is the ice-making filter? • The ice-making filter is a device which removes impureties from the water. How do I install the ice-making filter? • Connect the ice-making filter provided to the water tap (refer to the installation manual). • Remove the residue in the ice-making filter by rinsing it with water. How often should I change the ice-making filter? • Every 6 months on average but it may vary, depending on the water quality.
DA68-00500P 6/26/02 2:34 PM Page 16 Ambient Room Temperature Limits This appliance is designed to operate at the ambient temperatures specified by its temperature class marked on the rating plate.
DA68-00500P 6/26/02 2:34 PM Page 17 Installation Manual , AD E ms e l R b se pro ou a l e a i nt at y er Pl z h te po nd t /free re y e e n g a efo .
DA68-00500P 6/26/02 2:34 PM Page 18 INSTALLING THE FRIDGE/FREEZER Checking the Dimensions of Your Entrance Door Check the dimensions of your entrance door to determine whether the fridge/freezer can pass through it. DOOR DEPTH (except handle) 40mm 50mm 85mm Width 917mm 908mm 917mm 908mm DIMENSION Depth 884mm 724mm 729mm 759mm Selecting the Location for the Fridge/Freezer • Select a location with easy access to the water supply. • Select a location with enough space surrounding the appliance.
DA68-00500P 6/26/02 2:34 PM Page 19 FRIDGE/FREEZER TOO LARGE TO BE DELIVERED THROUGH THE ENTRANCE DOOR Disassembling the Leg Cover Assembly Open the freezer and refrigerator doors, and then disassemble the leg cover assembly by turning the three screws counter-clockwise. a LEG COVER ASSEMBLY SCREW Removing the Water Tube from the Fridge/Freezer 1) Remove the screw from clamp ( a ). 2) Disassemble the water tube by pressing the coupler (➁) and pulling the water tube (➀) away.
DA68-00500P 6/26/02 2:34 PM Page 20 Disassembling the Freezer Door 1) With the door closed, disassemble the upper hinge cover (➀) using a flat screwdriver, and then disconnect the wires (➁). 2) Disassemble bolt (➂) and screw (➃) to the counter-clockwise by using a tool, and take off the upper hinge (➄) along the arrow (➅). Take care when disassembling the door to ensure that it does not fall on you. 3) Disassemble the door from the lower hinge (➆) by lifting the door (➇).
DA68-00500P 6/26/02 2:34 PM Page 21 Disassembling the Refrigerator Door 1) With the door closed, disassemble the upper hinge cover (➀) using a flat screwdriver, and then disconnect the wires (➁). 2) Disassemble bolt (➂) and screw (➃) to the counter-clockwise by using a tool, and take off the upper hinge (➄) along the arrow (➅). Take care when disassembling the door to ensure that it does not fall on you. 3) Disassemble the door from the lower hinge (➆) by lifting the door (➇).
DA68-00500P 6/26/02 2:34 PM Page 22 Assembling the Freezer Door 1) Insert the lower hinge (➀) in the bracket lower hinge (➁). 2) Assemble the freezer door by inserting the hose (➂) in the lower side of the door into the hole in the lower hinge (➃) and pulling the hose down. 3) Insert the upper hinge shaft (➄) into the hole (➅). After leveling between the upper hinge hole (➆) and the hole of the refrigerator (➇). assemble bolt (➈) and screw (➉) to the clockwise by using a tool. 4) Connect the wires.
DA68-00500P 6/26/02 2:34 PM Page 23 Assembling the Refrigerator Door 1) Insert the lower hinge (➀) in the bracket lower hinge (➁). 2) Place the hole in the refrigerator door (➂) over the lower hinge (➃). 3) Insert the upper hinge shaft (➄) into the hole (➅). After leveling between the upper hinge hole (➆) and the hole of the refrigerator (➇). assemble bolt (➈) and screw (➉) to the clockwise by using a tool. 4) Connect the wires.
DA68-00500P 6/26/02 2:34 PM Page 24 Assembling the Water Tube 1) While pressing the coupler (➁), insert the water tube (➀) in the coupler. 2) Tighten the screw on the clamp ( ). a Assembling the Leg Cover Assembly a Assemble the leg cover assembly by turning the three screws clockwisely, as shown in the figure.
6/26/02 2:34 PM Page 25 IF THERE IS CLEARANCE BETWEEN FRIDGE DOOR AND FREEZER DOOR, PLEASE FOLLOW THE STEPS. First : Please level up the refrigerator. (The differance can cause, if the floor where installed is uneven) ● Freezer door is lower than that of refrigerator 1) Insert a straight driver (-) (➀) into hole of the control lever (➁), rotates it clockwisely and level up the balance.
DA68-00500P ● 6/26/02 2:35 PM Page 26 Second : Adjust the height of the refrigerator door. ● If the door of freezer is situated lower than the door of refrigerator.. ● If the door of freezer is situated higher than the door of refrigerator.. Adjustment part Adjustment part please open the door of refrigerator and adjust the height following the direction below. 1) Release a nut (①) in the bottom part of refrigerator until the last point of bolt (➁).
DA68-00500P 6/26/02 2:35 PM Page 27 INSTALLING THE WATER DISPENSER LINE 1) For the ice maker to operate automatically, water pressure of 1.4 - 4.5 kgf/cm2 is required. (It should be possible to fill a disposable paper cup (approximately 180 cc) within 10 seconds.) 2) The water tube can be cut to the required length. Make sure that the tube is not bent. 3) Place the water tube away from any sources of heat. 4) The purifier is for filtering only. It does not sterilize or destroy any micro-organisms.
DA68-00500P 6/26/02 2:35 PM Page 28 INSTALLATION PROCEDURE 1. Connect the water pipe with coupler and tap. CAUTION The water tube must be connected to the cold water pipe. If it is connected to the hot water pipe, it may cause the purifier to malfunction. 1) Close the main water tap. 2) Connect coupler “A” to the tap. 3) Every join should be protected with sealing tape. WARRANTY INFORMATION This water line installation is not covered by the fridge/freezer or ice maker manufacturer's warranty.
DA68-00500P 6/26/02 2:35 PM Page 29 4. Attach the purifier lock stations. (Model with the purifier) 1) Hold the purifier lock stations in the appropriate position (under the sink for example) and fix it tightly into place where to screw. PURIFIER LOCK STATION PURIFIER LOCK STATION WATER TUBE 5. Secure the purifier in position. (Model with the purifier) PURIFIER 1) Fix the purifier in position, as shown in the figure on the right. PURIFIER LOCK STATIONS TIGHTENING BAND 6.
DA68-00500P 6/26/02 2:35 PM Page 30 8. Complete the installation of the water dispenser line. 1) Switch on the fridge/freezer and press the lever on the left of the dispenser until water runs out through the water tube (approximately two to three minutes). (Press it until all air has been empty.) 2) At this time, check for any possible leakages at the joins in the water tube. After securing the water tube, move the fridge/freezer to the required location.
DA68-00500P 6/26/02 2:35 PM Page 31 Checking the Volume of Water Supplied to the Ice Maker. 1. Set the control panel to the option change mode. Press the FREEZER TEMP. and VACATION buttons at the same time for about 12 seconds until the temperature display switches to the option change mode and you hear a beep. 2. The number in the right-hand refrigerator temperature display corresponds to the option number. Press the REFRIGERATOR TEMP. button to increase the number.
DA68-00500P 6/26/02 2:35 PM Page 32