Fridge/Freezer Instruction Manual

When you open the refrigerator door, a light comes on to help you

find what you are looking for more easily. If you need to replace

the bulb(s), proceed as follows.

Type A or F

1 Remove the chiller compartment by:

◆ Pulling it towards you until it meets the stop

◆ Tilting the front up slightly and continuing to pull the

compartment towards you

2 With a flat-bladed screwdriver, prise out the upper part of the light

cover. Pull the cover free.

3 Unscrew and remove the two light bulbs.

4 Insert two new bulbs (maximum of 15 W, E14 small screw base).

5 Replace the light cover by pushing it until it clicks back into place.

6 Replace the chiller compartment by sliding it back into position.

Type B, C, D or E

1 Remove the chiller compartment (types B and E only) by:

◆ Pulling it towards you until it meets the stop

◆ Tilting the front up slightly and continuing to pull the

compartment towards you

2 Remove any shelves that are in front of the light cover, by:

◆ Lifting them slightly

◆ Pulling them towards you

3 With a flat-bladed screwdriver, prise out the lower part of the light

cover. Pull the cover free.

4 Unscrew and remove the light bulb.

5 Insert a new bulb (maximum of 15 W, E14 small screw base).

6 Replace the light cover by:

◆ Aligning the three tabs at the top

◆ Pushing the upper part into position first

◆ Then pushing the lower part into position

7 Replace the chiller compartment and/or any shelves by sliding

them back into position.

Changing the Light Bulb(s)

TEMP CONTROL

SR-28/29/42/43/ENG 18-12-59 15:30 Page 13