User Manual (Boost Mobile SPH-M820 (Prevail) English User Manual FA19_F7) (ver.FA19_F7)

119 2I. Camera
3.
Press or tap until the shutter sounds.
(Your device automatically saves the picture to the
DCIM folder on the microSD card.)
Camera Settings
1. From camera mode ( ) tap one of the
following onscreen icons.
䡲 Settings to access camera hardware settings:
● Brightness tap a brightness level (1-5).
● Night mode tap Off or On to inactivate or active
the flash for night mode.
● Picture size to set the size of your image.
Choose from:
2M Pixels, 1M Pixels, or VGA
Pixels.
● Picture quality to set the image quality for your
image. Choose from:
Super fine, Fine, or
Normal.
● Color effect to apply different color effects onto
images. Choose from:
None (default), Mono,
Sepia, Negative, or Aqua.
● Restore to defaults resets the camera to
system default settings.
䡲 Store location (On/Off) to store the actual location
(latitude) where the image was taken to later
display on Google Maps or used in other social
applications.
䡲 White balance to compensate for color differences
found within different lighting conditions. Choose
from:
Auto (default), Incandescent, Daylight,
Fluorescent, or Cloudy.
Settings
Store Location
White Balance
Metering
Zoom
Mode slider
SPH-M820UM.book Page 119 Friday, January 20, 2012 4:03 PM