Operation Manual

installation & connection
32_ installation & connection
INSERTING/REMOVING A SD MEMORY CARD
J
`
Disconnect the power cable from the camera before inserting the SD memory card.
Inserting a SD Memory Card
1. Open the cover in the rear of the camera.
(SNP-5300)
Using the screw driver, loosen 3 screws by turning
them counterclockwise and separate the dome cover.
(SNP-5300H)
2. Push the SD memory card in the direction of the
arrow shown in the diagram.
J
`
Do not insert the SD memory card while it’s upside down
by force. Otherwise, it may damage the SD memory card.