Operation Manual

setup screen
68_ setup screen
To add the home position
1. Move to a desired start screen point and press [ ].
The point will be set to the home position.
2. Click [
] in the home position. You will move to the predetermined home position.
3. When the camera is rebooted after setting, the screen is located at the home
position. (If the camera was on another sequence operation, the sequence is
performed.)
M
`
To activiate the Home position function, select Single Rectangle in the <Dewarping mode>.
To add a preset
1. Select the preset number to add.
2. Set the name for the preset.
3. Press the [
] button.
To delete a preset
1. Select the preset number to delete.
2. Press the [
] button.
To move to a desired preset
1. Select a preset number that you want to move.
2. Press the [
] button.