Operation Manual

installation & connection

28_ installation & connection

INSTALLATION (SNO-7084R)

This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the

external cable is not. You are recommended to install this product below the edge of eaves to

prevent the cable from being externally exposed.

Precautions before installation

Ensure you read out the following instructions before installing the camera:

• It must be installed on the area (ceiling or wall) that can withstand 5 times the weight

of the camera including the installation bracket.

• Stuck-in or peeled-off cables can cause damage to the product or a fire.

• For safety purposes, keep anyone else away from the installation site.

And put aside personal belongings from the site, just in case.

Installation

1. Fix the camera in 3 holes by tightening the

three tapping screws supplied with the

product.

2. Connect the cables with the camera port.

3. Adjust the direction of the camera with the

L-wrench supplied with the product.