User manual

Menu functions
84
Use SSL : activate the use of the SSL
(Secure Sockets Layer) protocol.
Retrieving server type : select the protocol
for the incoming e-mail server. The
remaining options depend on the protocol
type setting.
POP3 server / IMAP4 server : enter the IP
address or host name of the POP3 or IMAP4
server.
POP3 port / IMAP4 port : enter the POP3 or
IMAP4 port number.
Use SSL : activate the use of the SSL
(Secure Sockets Layer) protocol.
IMAP4 retrieving option : (IMAP4 protocol
only): set whether the phone retrieves only
new messages or all messages.
Retrieving option : set whether the phone
downloads e-mail headers only or the
complete e-mail.
Keep in server : leave copies of e-mails on
the e-mail server after retrieving.
My address : set your e-mail address.
User name : enter the POP3 or IMAP4 user
name.
Password : enter the POP3 or IMAP4
password.
Use SMTP Authentication : enable SMTP
authentication, which requires the user to
log in before sending e-mails.
Same as POP3/IMAP4 : select if you want
the SMTP server to have the same
parameters as the POP3 or IMAP4 server.
User name : enter the SMTP user name.
Password : enter the SMTP password.